The PRS angular contact ball bearing including three series : accurate angular contact ball bearing ,double direction angular contact thrust ball bearing ,four-point angular contact ball bearing .It - Update: 2009-08-19

The Three-row roller slewing ring bearing offers more capacity per unit size than any other Prs bearing design and is inherently the stiffest style of construction.Frictional torque is lower than othe - Update: 2009-08-18

The frictional torque of a track roller depends on many influencing factors such as load, speed and track roller type, as well as the lubrication conditions and seal friction. Due to the wide range of - Update: 2009-08-18

The PRS angular contact ball bearing including three series : accurate angular contact ball bearing ,double direction angular contact thrust ball bearing ,four-point angular contact ball bearing .It - Update: 2009-08-18

Four row inch-dimensioned tapered roller bearings This kind of bearing is major in suit for sustaining combined load from radial and axial load, but inclined to radial load. This bearing should not so - Update: 2009-08-17

The thin-section ball bearings series PRS are always used in the circumstances, such as requiring small space, heavy load ,light weight or limiting some special forms .At the same time ,we also provid - Update: 2009-08-17

Thrust ball bearings can handle axial loads only.It consists of shaft washer,housing washer and ball. There are two kinds of thrust ball bearing---single direction and double direction designs - Update: 2009-08-17

The wire raceway ball bearings can sustain forces from whatever directions due to their 3-point or 4-point geometry .The rings have the advantage that they fit themselves tightly into the bearing ri - Update: 2009-08-17

The Three-row roller slewing ring bearing offers more capacity per unit size than any other Prs bearing design and is inherently the stiffest style of construction.Frictional torque is lower than othe - Update: 2009-08-17

The frictional torque of a track roller depends on many influencing factors such as load, speed and track roller type, as well as the lubrication conditions and seal friction. Due to the wide range of - Update: 2009-08-17