Manufacturers Directory from Taiwan, China, Asia Manufacturers and Suppliers and exporters

We have diferent grades of Ferro Silicon, We can also customise the specifications as per buyer's requirement.

manufactured up to the international standard, can be used as deoxidizing agent or additional agent of alloy element for steel smelting and casting.

we are one of the biggest silicon metal exporters in China. we export silicon metal 553/441/3303/2202, and other specifications, we export several thousand tons of silicon metal every month.

Steel smelting as main deoxidizer and alloying constituent . It observably improve hardness , strength, and softness of steel . so , it is used as deoxidizer when smelting structural steel (Si content...

Cr: 60 or 65%min C: 8.5%max Si: 3%max S: 0.04%max P: 0.03%max Size: 10-50/10-60/10-100mm90%min Packing: In 1mt bag

Ferro Titanium

We are professional manufacturer and exporter dealing with all kinds of ferro-alloys. We can supply FeTi-30 FeTi-40,FeTi-70 etc.

Mg 5.0-6.5 % Si 43.0-48.0% Al 1.0-1.5% Ca 0.8-1.5% Re 1.0-1.5% Fe: The Balance Size: 5-25mm

red flakes and yellow flakes

chrome oxide green pigment grade and abrasive grade

chromic acid 99.7% and 99.5%

chrome sulphate 24-26% basicity:32-34%

99.7%

98.3%

CaSi cored wire, FeCa cored wire Pure Ca cored wire, BaSiCa cored wire, BaSiCaAl cored wire, Carbon cored wire, etc. Diameter of cored wire:9mm,13mm,14mm,15mm,16mm Feeding type: inside pay-off, out...

I. Ca-Al alloy Specification: Ca:30-85%,Al:Balance Size: 30-100mm(Irregular lumps), 3-30mm(coarse granules),

Used to be as the disoxidizer.The disoxidizer ability of Titanium is usually higher than Silicon ang manganese and can reduce a steel ingot aliquation,improve steel ingot quality,increase the efficien...

We are a manufacturer in specilized in Ferro-Alloy and we have 4 processing plant in Northeast and tianjin in China. We are also one of biggest factroy in field of these products such as FeCr, FeS...

We are a manufacturer in specilized in Ferro-Alloy and we have 4 processing plant in Northeast and tianjin in China. We are also one of biggest factroy in field of these products such as FeCr, FeS...

With the rapid development of the iron and steel industry, the output of high-quality steel and variety steel has increased substantially. Because of the increasing continuous casting rate and the con...