Blow Moulding Machines for Synthetic Resins Manufacturers and Blow Moulding Machines for Synthetic Resins Suppliers

CM-8Y Semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 0.1L to 2L. It is widely used to produce the carbonated bottle, mineral water bottle, ...

CM-A1 full automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles in all shapes.It is widely used to produce the carbonated bottle,mineral water bottle,pest ...

Type?GRT 50-2L (one station) Sample specification?Plastic hollow product within 2 liters

Maximum Outlined Diameter of Mold ?500mm Maximum Weight of Mold 150kg Maximum distance of mold base plate 510mm Maximum clamping stroke 270mm Angle range of measured-cast 0

Features 1.Advanced PLC control system, lightweight simple control panel. 2.Product obsolescence rate of less than 0.3% Technical parameters 1.Raw materrial: PET/PE/PC 2.Container capaci ...

KELI SZCX one stage injection blow molding machine for 2~1000ml PP,PE,PC,PS,ABS,BAREX material,single layer plastic bottle making in food,pharmaceutical,cosmetic packing industry(mhl at tzkeli dot com ...

Product Description: semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the carbonated bottle ,mineral ...

The machine is very easy to be operated and maintain. It is specially famouse for high producing and low power consumption.The percent of pass is over 99.9%

(1) ENERGY SAVING - Introduce Natural Air Flow - Minimize Energy Consumption - Optimize Heating Temperature (2) AFFORDABLE INVESTMENT - Minimum Maintenance Cost - Low Machine Investment ...

Product name: Epoxy resins CAS No.: 61788-97-4 Other Names: Epoxy - Polyester Resin 50/50% powder MF: (C11H12O3)n Property: Item Value Appearance Colorless transparent Solid flake Softening p ...

plastic bottle blow molding machine 1)Applicable Plastic:PE/PP/PETG/PC/PVC 2)Max volume: 5L 3)Double Station 4)High Quality

This bottles blowing machine is mainly use for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bott ...

BM-A2 Full automatic bottle making machine is suitable for producing PET/PE and PP plastic containers and bottles in all shape.

plastic material:HDPE,PE,ABS.PVC... max product volume:80L output(dry cycle):360pc/hr screw diameter:100mm screw L/D ratio:25-30 output of HDPE:180-250pc/hr No of screw heating zone:4-5 screw h ...

KELI SZCX one stage injection blow molding machine for 2~1000ml PP,PE,PC,PS,ABS,BAREX material,single layer plastic bottle making in food,pharmaceutical,cosmetic packing industry(mhl at tzkeli dot com ...

double and single station bottle blow molding machine(mhl at tzkeli dot com dot cn) for single layer,PP,PE,PC,PS,BAREX material bottle in food,pharmaceutical and cosmetic packing field.Available KBM65 ...

The machine is very easy to be operated and maintain. It is specially famouse for high producing and low power consumption.The percent of pass is over 99.9%

QCS-5000 two step automatic blow moulding machine is specially suitable for blowing large volume oil bottles and juice bottles with any shape. Advanced mico-computer controlling system ensures to ope ...

BM-A2 Full automatic bottle making machine is suitable for producing PET/PE and PP plastic containers and bottles in all shape.

one stage injection blow moulding machine for 2ml to 1000ml PP,PE,PS,ABS,BAREX,PC,one layer bottle making like eye dropper bottle,xylitol bottle,chewing gum,lotion bottle etc for food,pharmaceutical,c ...