Manufacturing Area
Polyimide FEP film is Polyimide film(BOPI) coated with FEP(F46) resin on one side(FH) or double sides(FHF) through the sintering process at high temperature, which combines the excellent properties of...
BOPI (Biaxial Oriented Polyimide film) is Polyimide Polycondensate by polycondensing PMDA and DDE through the process of forming film in strong solvents and then being stretched and Oriented by biax d...
Polyester film shows good dielectric properties, heat stability and high mechanical strength as well as size stability, air tightness. It is suitable for insulation in medium and small size cable wrap...
Be made of Silver Alloy material. widely used in low voltage apparatus and consumer equipments.
Solid Rivet, which is made from various Silver Alloy material such as Ag, FAg, AgZnO, AgSnO2, AgSnO2In2O3, AgW, AgC, AgNi,and so on.
Bimetal Rivet, under low voltage technic, it is widely used in AC Switch, and welded on contact bridge easily without additional weldable layer, so it make the manufacturing process simple and economi...
Tri-metal Rivet, which could save silver material about 60%, and electrical equipment with Tri-metal rivet could cut the cost a lot.
Abnomity Rivet, whose working face is made with silver alloy, while the weld face is made with CuNi, Fe and other material and also have small protruding point on it, so that the Rivet could be welded...
Electrical Contact Sheet, which are manufactured both by traditional and vacuum casting (silver-based alloys) and by powder mixing (silver-based pseudo-alloys). Amongst the materials that are added to...
Wire Contat, we have Ag Series, AgNi Series, AgSnO2 Series (Cd free),AgSnO2In2O3 Series (Cd free), AgCu Series.
Silver and pure silver possess very high electric and thermal conductivity, low and stable contact resistance and good processing and welding performance. Because of a little nickel added into silve...
AgNi series including AgNi10, AgNi15 and AgNi20 wire. AgNi wire are more and more used AC and DC low-voltage devices. AgNi series wire has high melting-point metal nickel has high electric conductivit...
These products use copper, copper alloy, silver, or silver alloy as a contactor. According to users' requirements, we adopt different technologies to effectively control composite thickness and plat...
Contact Bridge, which includes three types, composite sheet punch, rivet electrical contact, sheet electrical contact solder. Contact bridge is widely used in switches, relays, air-conditions, breake...
A large range of electrical contacts based on the alloys of silver for switchgear and control gear used in the range 16amps - 100amps and where high bond quality is essential. The diversity and fl...
toughened glass insulator used for the transmisson line. FOBUSD4.40
porcelain insulator for the transmission line.
high voltage for 330KV
Tianchang Ekea Electronics Co., Ltd. is located in Tianchang, where is on the west of Yangzhou , and economy is highly developed. Our company was founded in 1991, which is engaged in infrared r...
1. Die cast aluminum 2. 200Amps, 600Volt 3. Single phase, 3 Wire, 7 terminal, ringless 4. Suitable hub size: 1
Ads by Google
