Manufacturing Area
With "Zip" Type Spring Retainer Shank Diameter..........10mm(Round) Stroke Length.............66.7mm Blows Per Min.............2950/110psi Air Inlet......................1/4"PT
ARX-275 With Accessories as following: 5 Pcs Chisel Bit 1 Pcs Bit Spring Retainer 1 Pcs Quick Release Bit Retainer
Model number i??ZIC-JH-24 Rated Voltagei?? 230V/110V Frequency i?? 50/60HZ Rated lnput poweri?? 850W No Load Speedi?? 0-1050r/min lmpact rate i?? 4500min-1 Steel Dia i?? 13mm Concr...
Air Chisel Hammer Item No.: ARX-275C Chisel Shank Dia.........10mm(Round) Stroke Length..........................66mm Blows Per Min................2950/110ps Air Inlet...............................
We are the manufacturer of the wrought iron machine and forged machine. we also have good quality and low price.
The penumatic-power hammer is mainly used for processing stone surface,it has charactristic of low weight,reasonable structure,handy use and little air comsumption.
Hardened steel barrel and piston for less wear and longer life . Light weight aluminum housing . Built-in power regulator and trigger control . A must for general cutting and chipping and scrap...
The pneumatic-power hammer (QD30-1) is mainly used for processing stone surface. It has characteristic of low weight,reasonable structure,handy use and little air consumption.
Fuzhou ShenLong Rock Drill Factory is special for design,manufacture and promotion of pneumatic tool series which is widely used in quarries,coal mines,water conservancy,prospecting,mining,highway tra...
The pneumatic pick(SL80) is a ideal tool that break up concrete and other solid object in the road construction and installation.It has characteristic of simple structure,high efficiency and handy use...
The pneumatic pick is suitable for drilling in mine, crushing incompetent bed, concrete and clay, destroying hard or frozen stratum and other athletics occasion which need impact.
The machine has light-weight, simple structure, operate facility, auto stop when bump objective into pieces. It is suitable for drilling in mine, mining the soft ore; diging pole and feet-hole, karati...
Free speed:4500 RPM Average air consumption:4 (25%)scfm Chisel shank:0.401inch (round) Barrel stroke:1.69inch Exhaust: front Length: 5.24inch or 133mm Weight:1.12kg or 2.46lb Air pressur...
Ads by Google
