Manufacturing Area
Overview: CL-FOM100/FOM135 Fiber Modem can modulate G.703 E1 or V.35 signal to single-mode or multimode fiber which extend the transmitting distance of E1 signal greatly. E1 signal support framed and ...
1. Summary This compact desktop ZMUX-08E is the fundamental device for the digital communication system, which is also named PCM basic group device. The device is used to multiplex the signals such a ...
flexible function configure: the seventh?eighth slot specifies for CMU which provides STM-1 optical interface ,also provides taking of network management. optical interfaces are able to be configured ...
4E1 30 Channels of voice data Power:1+1 Interfaces: V.35, V.24/RS232, V.11/RS422 Transmit Ethernet
* Low processing delay and high bandwidth usage efficiency * Configurable encapsulation packet size for different applications * VLAN tagging and priority labeling for QoS * Local and remote LOS a ...
4E1 PDH Multiplexer can multiplex 4E1 and 1 optional port Ethernet (10/100Mbps line speed) signals in one fiber channel to transmit. It is suitable for low capacity, point-to-point application of remo ...
Overview: CL-FOM4100 4E1+100Mb Ethernet PDH (Plesiochronous Digital Hierarchy) which was used in exchanger for long distance transmission, and platform of mobile telecommunication, pager transmission ...
CL-EOS Series take SDH technology as its core to provide access, provide broadband IP service, realize access and convergence faced with broadband data application, and is a device for comprehensive a ...
CL-C1400 Protocol converter is a high-performance, self-learning distant Ethernet Bridge with small size and low cost, which makes it suitable for cost-sensitive bridge connection as the LAN stretcher ...
CL-FOM4104,CL-FOM8104,CL-FOM16104 4E1+4Eth/8E1+4Eth/16E1+4Eth OptiMux. is part of Multi E1 and Fast Ethernet transmission system family, used to build a 155Mb/s optical point-to-point link. Based on a ...
1.Merges the Ethernet and time-division multiplex (TDM) transmission to the same pipe.
The OPTIMUX(CL-FOM4104,FOM8104,FOM16104) is part of Multi E1 and Fast Ethernet transmission system family, used to build a 150Mb/s optical point-to-point link. Based on an ASIC chip; it performs the t ...
Overview: CL-EOP Ethernet to N*E1 protocol converter is the IP over TDM converter, which supports the conversion from MAC frames to 1 – 16 E1 lines. The maximum bit rate is 31.68Mbps (16E1 line ...
