Manufacturing Area
Power Rating: 0.16W, 0.25W, 0.5W, 1W, 2W, 5W, 10W, Resistance from 0.1 ohm ~ 50K ohms Tolerance from +/- 1%, +/- 5%, +/- 10%
Power Rating: 0.16W, 0.25W, 0.5W, 1W, 2W, 5W, 10W Resistance from 0.1 ohm ~ 47K ohms Tolerance from +/- 1%, +/-2%, +/- 5%, +/- 10%
PERFORMANCE : *Resisting 400oC max continuously *Heat dissipation is ultrally excellent *Terminal strength : 20kg min *Small size versus large gurrents *Resistance tolerance : below 5 10%, 5 an...
INTRODUCTION Wire wound resistors are made by winding the resistance wire non-corrosive, heat-proof and humidity-proof material. FEATURES Industry lowest cost. Delivery from stock in bulk taped, ...
WIREWOUND NONFLAME RESISTORS FEATURES: 1.high quality 2.sdandard tolerance A
Resistors lead free Cement resistor|Precision resistor|Power resistor|Carbon Film Resistor|Metal Film Resistor
more details pls visit www.onlybo.com/www.onlybo.net. or contact with us:marinawzy@gmail.com
1.Better insulation,anti wet; 2.higher tolerance(0.01%-1%),and low T.C.R
1.Low resistance(0.005ohm-10 ohm),high tolerance(0.01%-1%),and low T.C.R; 2.Better insulation and anti wet; 3.High stability and reliability.
Higher power(10w-3000w),and wide range of resistance
1.Wide range of power; 2.Coated with Glaze,so anti eat off,anti high temperature,can be used under bad envionment; 3.Anti wet,good insulation,powerful overload capacity,stability hotful,long-life op...
1.Small colume,wide range of resistance,stability in charateristics; 2.Axial wire lead,convenience fitting; 3.Coated with non-combustion paint.
Due to the set number of windings on the ceramic form, the resistance value range is relatively low. Tolerance isA?10% and this product is available in various shapes or in resistance boxes. Suitable ...
WIREWOUND NONFLAME RESISTORS FEATURES: 1.high quality 2.sdandard tolerance 3.variety of packaging-bulk 26mm and 52mm tape. cut and formed 6mm/52mm, CONSTRUCTION: 1.ceramic core(high conductivi...
Ads by Google
