Manufacturing Area
Manufacturers of building hardwares such as Fresh Nuts,Beans,Frozen Nuts,Acorn Cap Nuts,Alloy Steel Nuts,Aluminum Nuts,Anchor Nuts,Big Size Nuts,Brass Nuts,Clinch Nuts Closed End Acorn Nuts,Conica...
Item10:Hb Item11:Hpc Item12:Skc Item13:Fh Item14:Hfh Item15:A1 Item16:A2 Item117:H Item18:Kfe Item19:F00
Item51:Tso Item52:Tsoo Item53:Tbsop Item54:Tfhn Item55:Pf Item56:Bs Item57:Oso Item58:Ob
(1). hex head bolts like DIN933, DIN931, DIN558, DIN601, ANSI/ASTM, BSW etc. With class 4.8 6.8 8.8 10.9 grade2&5 etc. (2).nuts like DIN934 from M3-M42,etc. (3).washers like DIN127B, D...
Operating temp. range:-5C~+60C Valve structure :One-way shut-off Max pressure:10kg/cm2 Applicable fluid:Air Purpose:Air pipe branching
Material: carbon Computer No:A8115HCMA Temperature rang: -20a??~+80 a?? The spec of Max pressure: 1/4,3/8,1/2,3/4,1 Maxpressure:350kg/cm 2 Available fluid: Frozen Lubricant / Fresh Water / Air O...
Computer No:A8115HCMA Temperature rang: -20a??~+80 a?? The spec of Max pressure: 1/4,3/8,1/2,3/4,1 Maxpressure:350kg/cm 2 Available fluid: Frozen Lubricant / Fresh Water / Air Operation / Lubrica...
Silicon bronze fasteners are excellent for use in many marine and commercial applications which was made from copper with silicon added for strength.Silicon bronze is known as a high-strength alloy,ha...
Use the proven self-clinching design; installed with a squeeze in punched or drilled round holes-and become permanently mounted in the thin sheet; Available with blind or thru threads for stacking o...
Specifictation of the thread :M3--M9 / #4-1/4 Material: stainless steel The fastener head is locked securely in a blind, milled hole and is able to handlesubstantial loads. The concealed-head f...
Specification of the thread :M3 *0.5 / #4-40 Material: iron , stainless steel Treatment of the surface:zinc Screw-lock standoffs for mounting D-sub connectors panels;Provide a cost-effective solut...
Used in computers, a PC board or panel ,can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. Material: stainless steel
Use a spring action to hold PC boards and subassemblies securely, while allowingfor quick removal, screws and other threaded hardware are eliminated. This meansless parts to handle during assembly a...
Use a spring action to hold PC boards and sub assemblies securely,while allowingfor quick removal,screws and other threaded hardware are eliminated.This means lessparts to handle during assembly and...
These nuts for pressing into PC boards offer permanent threads for board mounting or component attachment. Standoffs are flare-mounted for applications requiring greater pullout performance. Specif...
These nuts for pressing into PC boards offer permanent threads for board mounting or component attachment. Standoffs available threaded or unthreaded for stacking or spacing. Specification of the...
Standoffs designed for installation on steel and aluminum chassis to ground PC boards; Annular projecting teeth eliminate the need for serrated or star washers to make good electrical contact with t...
Specification of the thread :M2.5-M3.5 / 2#-4# Material : iron , stainless steel , alumnium Surface treatment : zinc Used the proven self-clinching design,install with a squeeze in punched or ...
Specification of the thread : M3-M5 / 4# - 10# Material: iron , copper, stainless steel and alumnium Surface treatment: zinc Which use the proven self-clinching design,install with a squeeze in...
Material: iron , copper, stainless steel and alumnium Surface treatment: zinc Which use the proven self-clinching design, install with a squeeze in punched or drilled round holes-and become permane...
Ads by Google
