Manufacturers Directory from Taiwan, China, Asia Manufacturers and Suppliers and exporters

supplying Sony 2UPC-C14,original japan made

Heatwell? mica heaters are manufactured using mica as the insulation material and alloy resistance wire as the heating core. They can be made into circular or square profiles and other irregular ...

We supply various aromatic chemicals, flavors: Aldehyde C14/C16C18/C19 Ally Cyclohexyl Propionate 98% Allyl Amyl Glycolate 99% Allyl Caproate 99% Allyl Heptanoate 99% Allyl Hexanoate 98% Allyl ...

1.The High voltage wire for igniting and the Flame sensor wire must be connected with the Igniting Rod and the Flame Sensor Rod. 2.Both the high voltage wire and Flame sensor wire should keep clean a...

1. After the air-blower operates normally (postpone time for five seconds)and begin to ignite(ignite automatically and open the solenoid valve of gas). The gas in the oven is clean before igniting. ...

1.Input voltage??C-220V~240V, 50~60HZ. (AC-110V~120V, 50~60HZ.) 2.Output high voltage for igniting??6~18KV. 3.This is a manual, simple Igniter for various kinds of Gas Burners. Please make su...

1.The High voltage wire for igniting and the Flame sensor wire must be connected with the Igniting Rod and the Flame Sensor Rod. 2.Both the high voltage wire and Flame sensor wire should keep clean...

1. Input voltage??C-220V~240V, 50~60HZ. (AC-110V~120V, 50~60HZ.) 2. Output high voltage for igniting??6~18KV. 3. The solenoid valve should be at working condition while ignition. 4. The ign...

1. Input voltage??C-220V~240V, 50~60HZ. (AC-110V~120V, 50~60HZ.) 2. Output high voltage for igniting??6~18KV. 3. The solenoid valve for Smaller-Fire should be at working condition while igniti...

1. Input voltage??C-220V~240V, 50~60HZ. (AC-110V~120V, 50~60HZ.) 2. Output high voltage for igniting??6~18KV. 3. The solenoid valve should be at working condition while ignition. 4. The ign...

1. Input voltage??C-220V~240V, 50~60HZ. (AC-110V~120V, 50~60HZ.) 2. Output high voltage for igniting??6~18KV. 3. The solenoid valve for Smaller-Fire should be at working condition while igniti...

1.Input voltage??C-220V~240V, 50~60HZ. (AC-110V~120V, 50~60HZ.) 2.Output high voltage for igniting??~10KV. 3.GJ-720(GJ-710)-Igniter of double strength for diesel oil must match the procedure ...

1.The High voltage wire for igniting and the Flame sensor wire must be connected with the Igniting Rod and the Flame Sensor Rod. 2.Both the high voltage wire and Flame sensor wire should keep clean...

1.The High voltage wire for igniting and the Flame sensor wire must be connected with the Igniting Rod and the Flame Sensor Rod. 2.Both the high voltage wire and Flame sensor wire should keep clean...

1. Input voltage??C-220~240V, 50~60HZ.(AC-110V~120V, 50~60HZ.) 2. Output high voltage for igniting??6~18KV. 3. The igniting action will be stopped accordingly while the Main Fire is burning. ...

This Igniting rod must match a manual, simple Igniter or igniter of double strength for diesel oil together to ignite.

It can match the commercial burner, Blast -Furnace,Gas Burner, etc..

1.With safety device 2.For powerful instant heating 3.Durable forged-copper valve 4.With convenient functions 5.For sites and workshops 6.Instant heat...

1.Maximum power: 10000W 2.Gas consumption (maximum): 1.059m3/h 3.Gas pressure: 18kg/cm2 4.Tube: 100mm 5. Apply for Nature gas; 6. Safty valve. Products size:62X22X66cm...

this igniter is used in gas stove (single stove or two burner stove) also with alarm safety device