The structure of Deep groove ball bearings is simple and easy to be maintained, which is mainly used to bear radial load and definite axial load. When the radical clearance is increasing, Deep groove bearings will have the same performance as Angular... - Update: 2008-07-22

The structure of Spherical ball bearings can be divided into cylindric hole model and conical hole model. The cages are made of steel plate, synthetic resin and so on. The outer ring raceway of Spherical ball bearings is spherical shape, which has th... - Update: 2008-07-22

Cylindrical roller bearings belong to separable bearings, which is convenient for installment and disassemble. According to the different row number of rolling elements, Cylindrical roller bearings can be divided into single row, double row and more ... - Update: 2008-07-22

Roller bearing units have spherical outside diameter, which accommodate with the inner hole of concave spherical surface in bearing housing. It has the feature of automatically adjust to centre, and be applicable for shaft with poor steel feature and... - Update: 2008-07-22

Taper roller bearings is mainly bear radial load and also bear axial load. The basic load rating is depend on the raceway's angle of outer ring. The lager angle, the larger load rating. Taper roller bearings belong to separable bearings, which can ... - Update: 2008-07-22

Thrust ball bearings are separated bearing, according to its structure it is can divided into two parts:single-direction and double direction.The single-direction thrust ball bearing can withstand axial direction of a load, two-way thrust ball bearin... - Update: 2008-07-22

This bearing can afford the radial load and the axial load at the same time,and can work under high speed,if the angular is bigger,the axial load is bigger. The cage for this bearing have many kinds,such as the steel,the CU AND SO ON. - Update: 2008-07-22

Linear bearings / bearing have the following advantages: the friction is small, less power consumption, drive high accuracy and flexibility of Light, which are mainly used CNC machine tool and so on. - Update: 2008-07-22

This bearing can bear a bigger radial load,and aslo bear axial load,the bearing can work normal if the Inclined not more than 1 degree to 2.5 degree. - Update: 2008-07-22

We can produce the bearing as the customer's drawings,we can produce many kinds of non-standard bearing. Currently our company has produced fuel pumps, hydraulic gear pump series bearings. - Update: 2008-07-22