The " VSM 6A Automatic Seam Monitor " is a compact measuring system for quick and accurate automatic seam measurements and storing of seam images. The seam is positioned manually in front of the camera and is digitised by the computer. Within se... - Update: 2009-03-12

The Canneed " VSM 3A Automatic Seam Monitor " is used with a PC to be a compact measuring system for quick and accurate automatic seam measurements and storing of seam images. The seam is positioned manually in front of the camera and is digitised... - Update: 2009-03-12

Canneed "ABT-200 Burst Buckling Tester for Aerosol Cans" is used to test the buckle value of bottom and end (dome) of aerosol cans and the pressure at which the can bursts. Equip with the special designed clamp device, ABT-200 is able to test the b... - Update: 2009-06-26

Canneed Seam Sight(TM) Full Automatic Seam Measurement System (V2) is the solution of full range double seam measurement. The automatic seam monitor of Canneed Seam Sight(TM) system has adopted the advanced optical system and Golden Lens(TM) video ca... - Update: 2009-06-26

The Canneed ??Pop & Tear Tester PTT-200?? has been developped for testing EO/ RP /SOT/ OVAL ends. The measurement is microprocessor-controlled. As test result the POP and TEAR strength appear in the display. Depending on the holder, ends of vario... - Update: 2009-03-12

CANNEED ��CSS-200 seam saw�� is a special seam circular saw with double cut for can double seam inspections. The CSS 200 was specially designed for 2- and 3-piece cans. Also aerosol-cans may be sawed with this saw. The nitrated blades achieve togethe... - Update: 2009-03-12

Canneed ��ZM570-D Digital Body Blank Gauge�� These units are made for the quality control of can body blanks. 1. Precision gauge for measurement of body blanks with the help of a incremental ruler/ fine measuring gauge combination and a digital dia... - Update: 2009-03-12

The Canneed automatic ��STR-100 Seam Stripper�� is a sensible, affordable, teardown method to prepare the double seam teardown analysis. One fast, safe teardown operation without damaging or distorting the cover hook. Reduce teardown time for more fr... - Update: 2009-03-12

The ' Canneed VRM 3A Video Rivet monitor ' is a Video camera system to observe and evaluate the rivet profile images of ends. Any end of varying diameter may be tested. The end is cut throught the rivet by the low speed saw, the rivet is positi... - Update: 2009-03-12

The ��canneed ABT-100 Burst Buckling Tester for Aerosol Cans �� is used to determine the buckle value of bottom and end (dome) of aerosol cans and the pressure at which the can bursts. At high pressures from approximately 22 - 28 bar, it may happen... - Update: 2009-03-12