stainless anchor Manufacturer - stainless anchor Manufacturers and stainless anchor Supplier Page 31

Category: Stainless Steel Products

This kind of steel improves the content of P and S on the basis of 12Cr18Ni9 to improve machinability. The steel is the most suitable material for making fly-cutting equipment such as automatic la ...
Keyword : SUS303 Stainless Steel | SUS303 Stainless Steel/ X8CrNiS18-9

Category: Stainless Steel Products

This steel is a kind of ultralow carbon austenitic steel which is developed for overcoming 06Cr19Ni10 steel's serious tendency of intercrystalline corrosion in some conditions; it has similar property ...
Keyword : SUS304L Stainless Steel | SUS304L Stainless Steel/ X2CrNi19-11

Category: Stainless Steel Products

This steel is developed for improving its cold forming on the basis of 06Cr19Ni10; it is added with Cu to reduce the tendency and rate of work-hardening and it can have the ultimate cold deformation u ...
Keyword : SUSXM7 Stainless Steel | SUSXM7 Stainless Steel/ X2CrNi19-11

Category: Stainless Steel Products

This steel is developed for improving its cold forming on the basis of 06Cr19Ni10; it is added with Cu to reduce the tendency and rate of work-hardening and it can have the ultimate cold deformation u ...
Keyword : SUSXM7 Stainless Steel | SUSXM7 Stainless Steel/ X2CrNi19-11

Category: Stainless Steel Products

Belong to nickel-saving steel; its property is close to 12Cr17Ni7 and it can replace 12Cr17Ni7. The product has no magnetism in solid solution state and it has a little magnetism after cold working. ...
Keyword : Stainless Steel | US201 Stainless Steel X12CrMnNi17-7-5

Category: Stainless Steel Products

The steel has the longest history. The product has good plasticity, toughness and property for cold working in solid solution state and has better corrosion resistance in mediums such as oxidizing ...
Keyword : SUS302 Stainless Steel/ X12CrNi18-8

Category: Stainless Steel Products

This kind of steel improves the content of P and S on the basis of 12Cr18Ni9 to improve machinability. The steel is the most suitable material for making fly-cutting equipment such as automatic la ...
Keyword : SUS303 Stainless Steel/ X8CrNiS18-9

Category: Stainless Steel Products

The steel is a kind of developed steel that improves Ni content on the basis of 12Cr18Ni9 and it has low hardenability. The steel is suitable for spinning, special cold drawing and cold heading. ...
Keyword : SUS305 Stainless Steel/X6CrNi18-12

Category: Stainless Steel Products

The steel has higher intensity and hardness after hot working and has good corrosion resistance against oxidizing acid solution and organic salt solution. It is commonly used in making parts, cont ...
Keyword : SUS431 Stainless Steel

Category: Stainless Steel Products

The steel belongs to austenitic steel and has high Cr-Ni content; its corrosion resistance and heat resistance are all better than 06Cr19Ni10's. The steel can be used in making corrosion resistanc ...
Keyword : SUS309S Stainless Steel/X7CrNi23-14 | SUS309S Stainless Steel

Category: Stainless Steel Products

Process:1/2"?20": Cold Extrusion Forming               22" ?48": Hot Extrusion Forming Sizes:Seamless Type: 1/2"?20" (DN15?DN500) &n ...
Keyword : stainless steel reducer tee | stainless steel tee | 304 stainless steel tee

Category: Stainless Steel Products

Process: Cold Forming Sizes:Seamless Type: 1/2"?20" (DN15?DN500)           Welded Type:   1/2"?48" (DN15?DN1200) Standards:GB/T12459 ...
Keyword : stainless steel concentric reducer

Category: Stainless Steel Products

Process:Cold&Mandrel Forming Sizes:Seamless Type: 1/2"?20" (DN15?DN500)           Welded Type:   1/2"?48" (DN15?DN1200) Standards:GB/T124 ...
Keyword : stainless steel elbow 45 degree

Category: Stainless Steel Products

Process?1/2"?16":Cold Forming                18"?24": Argon Arc Welding Sizes:1/2"?20" (DN15?DN500) Standards:GB/T12459, GB/T13 ...
Keyword : stainless steel stub end

Category: Stainless Steel Products

Process:Cold Press Forming Sizes:1/2"?20" (DN15?DN500) Standards: GB/T12459, GB/T13401, SH3408, SH3409;ASME/ANSI B16.9, B16.28, ASTM A403, MSS SP-43;DIN 2605, DIN2609, DIN2615, DIN2616;JIS B2311, JI ...
Keyword : stainless steel cap

Category: Stainless Steel Products

Process: Cold Forming Sizes:Seamless Type: 1/2"?20" (DN15?DN500)           Welded Type:   1/2"?48" (DN15?DN1200) Standards:GB/T1245 ...
Keyword : stainless steel eccentric reducer

Category: Stainless Steel Products

Process:Cold&Mandrel Forming Sizes:Seamless Type: 1/2"?20" (DN15?DN500)           Welded Type:   1/2"?48" (DN15?DN1200) Standards:GB/T124 ...
Keyword : stainless steel elbow 180 degree

Category: Stainless Steel Products

Process:1/2"?20":Cold Extrusion Forming             22" ?48":Hot Extrusion Forming Sizes:Seamless Type: 1/2"?20" (DN15?DN500)   &nbs ...
Keyword : stainless steel cross

Category: Stainless Steel Products

Process:1/2"?20": Cold Extrusion Forming               22" ?48": Hot Extrusion Forming Sizes:Seamless Type: 1/2"?20" (DN15?DN500) &n ...
Keyword : stainless steel straight tee

Category: Stainless Steel Products

Process: Cold Forming Sizes:Seamless Type: 1/2"?20" (DN15?DN500)           Welded Type:   1/2"?48" (DN15?DN1200) Standards:GB/T1245 ...