Related Category (2)
Manufacturing Area
In = 20kA Imax = 40kA High Energy MOV GDT/NPE Compact Housing
in according with IEC61643-1:2005. *High TOV capacity *Iimp 25KA (10/350) *No leakage current and no follow current (Patent) *Very low Up (less than 1.5KV for Uc 320Vac) with Fault indication win...
1,high overload protection,lowest loss. 2,Authorized Test report surge protector,surge protective device,surge protection
Strong protection function Low remnant voltage Adopts independent information property right and high performance sensitivity resistance components Inner metal screen protection module Built-in ov...
This series is for protection of MCR equipment against over-voltage, and it can endure large discharge current and has quick response.
Normal operating voltage (Un): 220V / 380V Max cont operating voltage (Uc): 275V/320 / 385V /420V/600V Nominal discharge current (In): 20KA (8/20Us ) Maximam discharge current (I max): 40KA (8...
SBT70D21 keyset SPD for antenna system is designed for protection of the sensitive antenna feedback system: avoid the destruction result from the lightning induced voltage, power interference and stat...
JVS16/2 Surge Protective Device series (referred as SPD) provides protection against surge current resulted from direct or indirect lightning strike or other instantaneous overvoltage. One pole: prov...
Power Surge TYD-120/100BM (Surge Protection, Surge Protection Device, Surge Arrester, SPD, Surge Suppression, Surge Protective Device,power surge,power surge protector,power surge protection,power pr...
1) Protection class: provides B, C and D 2) Composite type: 1 pole, 2 poles, 3 poles, 4 poles 3) Maxi. continuous operating voltage: 140, 275, 320, 385, 420, 550V 4) Nominal discharge current (8...
it suitable for connecting to QBLQ-17/50 M.o.v surge arrester .it can provide high voltage lighting and switching surge protection of transformers ,cable, equipments and other compents typically locat...
Main Feature Rated voltage: 230V/50Hz,60Hz Rated Current: 16A
1) Connector interface: 7/16 (male, female) or N (male, female) 2) Characteristic impedance: 50Ω 3) Surge current: 100kA, 8/20μs 4) Insertion loss: 0.1dB (max.) 5) VSWR (0.8 ~ 2.2GHz): &...
This series surge protector use international advanced complex lightning guard technique and imported lightning-proof components and assemble with special process. It is designed with the rules: multi...
TKL15 Full-automatic over-voltage Protector Features TKL15 household full-automatic under-volt-age delay protector are a new generation of household electrical equipment protector made by our comp...
BY2 series surge protective device (protector in short) is applied in A.C 50/60 Hz,
Complete unit consists of upper part and base, premounted and ready for connection Built-in thermal cutoff member can disconnect SPD from power-line Fast response time, less than 25ns Lower limi...
2.4GHz Surge Protector
Summarize Application scope JVS1 Surge Protective Device series (referred as SPD) provides protection against surge current resulted from direct or indirect lightning strike or other instantaneous...
1. Zinc oxide varistor. 2. Materials and marking. 3. Marking: VCR. 4. Electrode material: AG paste. 5. Coating material: epoxy. 6. Lead material: tin-plated copper wire.