The PBM-2500 machine is light weight, just 13 lbs. and is designed to bevel boiler tubes. The tool bits are held in by our optional wedge lock system. The torque accepting mandrel with lock in blades (no springs) easily stops any pieces from dropp... - Update: 2012-04-17

The PBM-4500 machine comes with a torque accepting mandrel, built with a worm gear drive unit for extra torque to handle extra thick pipe walls. This machine can bevel, face, and counter-bore 1" wall - worry free from damaging the gears. PERFORMAN... - Update: 2012-04-17

The PBM-6000 machine comes with a torque accepting mandrel, built with a worm gear drive unit for extra torque to handle extra thick pipe walls. This machine can bevel, face, and counter-bore 1.25" wall - worry free from damaging the gears. PERF... - Update: 2012-04-17

The PBM-8000 machine comes with a torque accepting mandrel, built with a worm gear drive unit for extra torque to handle extra thick pipe walls. This machine can bevel, face, and counter-bore 1.25" wall. PERFORMANCE: ? Additional 10? extension ki... - Update: 2012-04-17

This lightweight 25lb. facing machine has a wide working range of 1" to 4-1/2" OD. Our facing tool offers floating collets that let you grip oversize or out-of-round tubing. As with all our "M" style machines, we offer two types of collets. Use "... - Update: 2012-04-17

This is our first machine and the tool that started a revolution in the field of facing tools. Our machines offer increment feed control so you can cut and debur tubing at precision lengths. PERFORMANCE: ? Size range 1/8? to 1.5? (3.175 mm - 38.1... - Update: 2012-04-17

TSM-1000 is one of the smallest designed facing tools on the market today. The machine is powered by an air cooled 18V-Li Metabo battery motor and the total working weight of the machine is 6 lbs. The design of this machine makes it easy to use on... - Update: 2012-04-17

This new facing tool will face tubing from 1/2" to 3? and is designed like our TSM-4500M, but lighter in weight, approximately 18 lbs. This tool was designed with our Pharmaceutical contractors in mind. Our feed knob will give you the control you ... - Update: 2012-04-17