RP208EW4 4-Zone Wireless Receiver should be equipped with RP208CN control panel to use. It is programmable for time monitoring. The emitter has low power or tamper monitoring function. It indicates when there is interferential signal. Support all RK series wireless detectors/emitter. It has circulated code, and every zone can connect 8 wireless detectors/ emitter.

RP208EW4 4-Line Wireless Receiver is easy to install.

1. RP208EW4 can receive and handle 32 long distance wireless signal at most, including PIR Detectors and Smoke Detectors, Magnetic Contacts, Wireless Panic Button and Remote Controller etc.
2. 4-line zone alarm output
3. Record pre-programmable recognized location of each emitter when installing
4. Alarm output is suitable for any panel

Preparation Work before Install
1. RP208EW4 can be installed together with control panel or on other suitable place
2. Receiver should be installed in the center when there is more than one emitter.
3. Receiver should be far away from metal and other wireless frequencies, such as TV-set, computer etc
4. Connect the antenna onto the left JPI port
5. All the DIP switched should be off

RK208EW4 Function Switch
1. All the output is dry contact, NC
2. JPI: Use for antenna connection
3. SW1-SW8: Use for programming and testing options
4. S2: Use for changing zones when setting location