CSF10 is a fingerprint reader specifically for the Access Control .Its remarkable advantage is that it can match with most of the access controllers on the market ,inland or abroad, It supports Wiegand 26-64 output ,and integrates special access control software which can be upload, download, delete and wiegand products ,all input /output are using anti-jamming protection and over-voltage/circuit protection. The product experiences the strict degradation test before leaving factory ,high stability the main feature.

Benefits�G

1.Support wiegand 26 or user-defined format, match most of door access controller
2.External connected with IC/ID reader.Card+ Fingerprint validation mode for currentreader
3.Adopt Biokey 2005 latest algorithm and intel32 bits processor
4.Option for built in Mifare reader or EM reader , it can deal with 3000 fingerprint templates , no matter good or poor quality, within only 1 second.
5.Adopt solid, durable, anti-static optical sensor
6.user-defined ID No, easy to manage
7.Standard RS485 connection, RS 232 or TCP/IP as auxiliary communication port
8.Support u are u sensor or CSF10 for collecting fingerprint template
9.Stability protection: reset switch, hardware watchdog, communication setting initialization by hardware, anti-over voltage and over current protection.
10.Dismantle alarm TTL output
11.Convenient DB15 connection

Applicable Wiegand manage software for fingerprint enrollment, download, upload, deletion

Version
Name
Type
Note

Standard
Standard fingerprint reader
CSF10
Standard version

With in-built ID module
Fingerprint reader with in-built ID module
CSF10-ID600
Template capacity : 600�Asupport 1�G1 and 1�GN

CSF10-ID5000
Template capacity : 5000�Asupport 1�G1

CSF10-ID8000
Template capacity : 8000�Asupport 1�G1

With in-build Mifare module
Fingerprint reader with in-built IC module
CSF10-SMART
Infinite capacity�Asupport 1�G1



Technical Specification :

Terms Content
Wiegand input and output
provide a standard wiegand26 or user-defined format to controller, accept the wiegand26 input, that is, a ID card reader could connect toit directly

Capacity of the templates
Standard version
600 templates

The version With in-built ID module
600/5000/8000 templates�]three options�^

The version with in-build Mifare module
Infinite capacity

Verification mode
Standard version
1�G1 or 1�GN, support only fingerprint

The version with ID card
When 600 templates, 1�G1or 1�GN, support only fingerprint, card+fingerprint, only card

The version with ID card
When 5000/8000 templates, 1�G1, support card+ fingerprint

Communication ways
TCP/IP as backup
Default IP address�G192.168.1.201

RS-485
Default baud rate�G38400, device number�G1, port�GCOM1

Sensor
Type
Optical

Resolution
500DPI

Display
Indication
Power indicator�Adual-color LED

Identification
Speed
speed��2 sec

Technical spec
FAR?0.0001%, FFR?1%

Alarm
Dismantle alarm
TTL (transistor-transistor logic) output for alarm

Configuration
Intel32bit processor, 2005 version algorithm

Power
12V DC, currency under idle status��50mA, wording currency��400mA

Operation environment
Temperature
0�J-45�J

Humidity
20%-80%

Software
Management software of fingerprint reader

Size
130��58��62mm