We supply line striper for road line marking at good price from China.

Line striper ( walking behind) ST1000-I/II, ST300-I/II
1. Engine: 5.5 HP gasoline engine.
2. Paint pump: High pressure airless diaphragm pump, large flow, stable pressure.
3. Spray gun: Manual spray gun with reversible striping tip (20/25), easy use and repair, creating straight long line.
4. Hose: 6m long hose used for special application, such as spray out arrow, letter, zebra crossing, special signs and lines.
5. Chassis: Steel welding frame, surface chrome-plated, galvanized or corrosion resistant coated, with manual brake device for convenienct stop on the ramp.
6. Locking front swivel caster: Brake handle controlled, locks into straight or radius mode for striping straight line, arc or curves.
7. Application paint: Solvent base traffic paint.
Option::Self propelled operator seat, ZT-II.


Model : ST100-I/II
Engine:5.5 HP 4-strock air-cooled gasoline engine.
Fluid pump :Max pressure: 20Mpa.
Work pressure: 10-15Mpa.
Max flow: 8.5L/min.
Spray gun :2
Line width:100-450mm
Hose:6m
Paint tank:65L, one filter inside, one filter at outlet
Glass bead system : ST-I: dispenser, ST-II: Spray gun

Model:ST300-I/II
Engine:5.5 HP deceleration gasoline engine.
Fluid pump :Max pressure: 20Mpa.
Work pressure: 10-15Mpa.
Max flow: 4.5L/min.
Spray gun :1
Line width:100-200mm
Hose:6m
Paint tank:Optional: one filter at outlet
Glass bead system : RT300-I: non, ST300-II----spray gun


Paint striper ( rie-on) XCZ-I
1.Engine: Honda or Robin 20Hp air-cooled gasoline engine.
2.Driving system: Variable speed transmission system with automatic brake device, freely operated to forward, back off or stop
(HTS), Left and right wheels with differential driving device make the curve driving and turning flexible and convenient. Manual
brake system makes the running safer.
Forward: 0-22km/m;
Back off: 0-3km/h;
. Max climbing capability: 15��.
3.Micro-electronic control system: four-type marking ways (also can specially design according to customers' standard). Spray
gun controller can freely change the guns between the single and double spray guns.
4.Chassis: Firm welding frame, chrome-plated , galvanizated or sprayed coating with corrosion resistance, equip with high speed
bearing to ensure the whole machine lighter and more convenient.
5.Rubber wheel: gas-filled pressure resistance vacuum ones, diameter: 400mm.
6.Guide rod: easy operate, can be freely adjusted to up, down, left and right.
7.Illumination and alarming function: Install with high intensity illumination lamp, for work t convenient at nigh. The alarming
lamp with adjustable flicker frequency greatly improves the safety of work at night.
8.Paint pump: Single hydraulic piston high pressure airless pump, big flow and stable pressure.
Max pressure 20Mpa(Working pressure 10-15Mpa).
Max flow:20L/min.
9.Paint tank: Capacity : 65L. sieve inside the tank.
10.Spray gun: three new type pneumatic spray guns and one hand spray gun with lengthening pipe for spraying special sign like
arrow and letter. Reversible striping tip(30/20) makes discharging easy and convenient on-spot. The non-arc tip ensures the base
line collimated.
11.Available paint: cold solvent , water based paint.
12.Spraying width:100-450mm.
13.Glass beads spraying system: Automatic definite quantity dispenser, work synchronously with paint spraying system, which
ensures the dispensing more even and more economical.
14.Glass beads bin: Capacity is 25kg, with window.
15.It can finish the pre-marking synchronous with marking line, which improve efficiency double times.
16.Size:1880mm x (length) x 740mm(width) x 1650mm(height)
17.Weight:564kg.

Paint Striper(ride-on) ZCZ-I
1.Engine: 30Hp water-cooled electric startup diesel engine with four-cylinder inline, low noise and environmental protection, water temperature, voltage and engine oil indication, max rotating speed: 3000r/min. Fuel tank capacity: 50L.
2.Driving system: Variable speed transmission system(HTS) with automatic brake device, which can be freely operated in forward, back off or stop.
3.Driving speed: Forward: 0-22km/h; back off: 0-12km/h; Max climbing ability: 15 degree.
4.Spray system: Single hydraulic high-pressure airless piston pump with flow 20L/min, max spraying pressure: 20Mpa.
5.Spray gun: 3 new type pneumatic spray guns and one manual spray gun with lengthening pipes ,and install with hard side columnar reverse wastewater nozzle(30/20), discharging on-spot easy and convenient, and the non-arc nozzle ensures the baseline collimated. According to the needs of project, three spray guns can work at the same time. Spray width:100-450mm.
6.Application Paint: Normal solvent traffic paint,water based traffic paint.
7.Glass beads spraying system: Automatic definite quantity dispenser can work synchronously with the paint spraying system, which ensures the dispensing more even and more economical.
8.Glass micro-beads storage bin: One(or double)storage bin with window, capacity each bin: 50kg.
9.Control system: Micro-electronic control system, which can freely set the line type of single solid line, double solid line and broken line.
10.Chassis: Firm welding frame, four-wheel structure, gas-filled pressure wheel with the diameter 480mm, one seat for operator who can freely control the directions by the hydraulic steering-wheels, Stable brake system for driving safer.
11.Paint tank: Double tanks, made of cold-rolling oxidation resistant steel, capacity: 2x100kg.
12.Gun bracket: Foldable bracket with equal distance to road, spray width is adjustable ffreely.
13.Pre-marking system: Synchronous with pre-marker working.
14.Guide rod: Pulling adjustable type, to up, down, left and right.
15.Alarming function: Adjustable alarm lamp and electronic warning arrow( arrow direction is adjustable) for safety construction condition.
16.Transportation: Optional tilt-trailer (TGC) device, easy for the long distance transportation.
17.Dimension & Weight: 3000mm (L) x 1430mm (W) x 1800mm(H), 1100kg

Line striper (truck-mounted) CZ300-I/IIA, CZ300-I/IIB
1. Engine: 13 (16 HP) HP four-stoke air-cooled gasoline engine.
2. Paint pump: vertical piston pumps,
flow: 20.L/min max.
pressure: 20Mpa max,
working pressure:8-12Mpa.
CZ300-IA & CZ300-IB: Single pume for single color spray
CZ300-IIA & CZ300-IIB; double pumps for double color spray, two, three or four guns.
3. Paint tank: double large tanks (150kgx2), hydraulic agitating.
4. Line width: 100-1000mm.
5. Glass bead system:
CZ300-IA & CZ300-IIA: spraying;
CZ300-IB & CZ300-IIB:dispensing.
6. PLC Control: Programmable, for setting single soild or double solid line, dashed line.
7. Spray gun: with reversible striping tip(30/20).
CZ300-IA & CZ300-IIA: Electrical controlled.
CZ300-IB & CZ300-IIB:pneumatic controlled.
8. Spray gun carriage: Floating gun mounted preventing line width from changing.
9. Guide rod: chrome-plated telescopic rod ( option: video guide system).
10. Structure: Integral high strength welding structure.
11. Cleaning system: built-in clean device for spraying system,easy use at spot.
12. Application paint: CZ300-IB & CZ300-IIB for waterbased paint, CZ300-IA & CZ300-IIA for solvent paint.
Option: pushcart for striping line for pedestrian,parking lot and lane.


Paint Striper (self-propelled) ZSF800
1. Application paints: Solvent paint and water base paint.
2. Engine: 16.0 Hp four-stroke air-cooled gasoline engine. Fuel Tank: 8.0L
3. Driving system: Manual brake, drived by gear motor fitted on rear wheel, moving forward, back off, stop and turn around easy and flexible.
4. Micro-control system: Pre-programmed 16 types of line for oosing, 8 standard line and 8 definable lines, can display mileage and sections of dashed.
5. Air compressor: Double-cylinder, double-strock compressor. Air flow: 0.8 m3/min.
6. Paint tank: Capacity 90L. with agitator and removable filter, easy cleaning.
7. Spray gun: Pneumatic ocntrolled spray gun for easy work, pneumatically gun bracket makes the spray gun keep at the same height over accidented road.
8. Glass bead spray system: Glass beads spraying and paint striping synchronously.
9. Line width: 10-20cm.
10. Guide rod: Freely adjustable to Up, down, left, right.
11. Front swivel caster: Pneumatic controlled for straight line striping. Released for curve striping, easy work.
12.Light and alarm: High intensity illuminating light for easy working at night, adjustable flicker frequency alarm light can greatly improve safety condidtion.
14. Skitboard: Located behind for operator standing to reduce fatigue.
15. Dimension: 1900mm(L) x 700mm(W) x 1500mm(H).
16. Weight: 350kg
Option: operator seat ZT-I

Line remover QC-III
1. Engine: 9.0HP air-cooled gasoline engine.
2. Removal width: upto 200mm.
3. Removal depth: upto 2.5mm.
4. Removal speed: 30-60m2/h.
5. Drum Assemblyi??Quick changable to the different width and depth.
6 . Cutter: made of tungsten carbide or special steel, hard and fast.
7. Varibale depth setting: Located at handle for easy operation to provide accurate depth control of surface removal.
8. Functions and features:
a. remove traffic lines.
b. cleaning floors of dirt and oils.
c. grinding high spots of bitumen and concrete road.
d. remove grout float to increase line marking quality.
9. Vacuum hookup: for dust-free operation.
10. Operation method: manual push-pulling.
11. Dimension: 980mm(L) x 450mm(W) x 900mm(H).
12. Weight: 65KG.

Self-propelled Operator Seat, ZT-II
Engine: Robin 6.0 HP or 5.5 HP Honda four-stroke air-cooled gasoline engine.
Driving system: Oil-pressure variable speed transmission system with automatical brake device, flexible
move in forward, back off or stop(HTS). Differential transmission device on left,right rear wheels makes the
driving in curve and turning flexible. Pedal brake device makes the running safe.
Forward: 0-4km/h.
Reverse: 0-3km/h.
Climbing: 15��.
Chassis: Firm welding frame, chrome-plated , galvanizated or
sprayed coating with corrosion resistance, high speed bearing to
ensure the whole machine lighter and more convenient.
Rubber wheel: Diameter: 440mm.
High-back seat: Fully adjustable.
Illumination: High intensity illumination lamp for convenient
opeation at night.
Dimension: 1350mm(L) x 650mm(W) x 1020mm(H).
Weight: 52kg

Operator Seat, ZT-I
Chassis: Firm welding frame, chrome-plated , galvanizated or sprayed coating with corrosion resistance,
high speed bearing to ensure the whole machine lighter and more convenient.
Rubber wheel: Diameter: 440mm.
High-back seat: Fully adjustable.
Dimension: 1050mm(L) x 650mm(W) x 1020mm(H).
Weight: 38kg.