ITC T-60A, T-120A, T-240A powered mixer Amplifier is a basic mono 30/60/120Watts PA amplifier It has 3 MIC inputs, 4 AUX level inputs.
Bass, Treble, MIC1-4/INPUT1-4, Master Volume Control
Priority muting is achieved via MIC1 or MIC2 switch able to overriding MIC3-4,INPUT1-4 for paging and emergency alarms. This priority function will be first in first served.
MIC1-4 Phantom power ON/OFF switch for condenser MIC input
4 ohms low impedance, and 100V constant voltage speaker outputs are provided.
Extensive protection from Short-circuit and thermal protection
AC and DC operation

Power Requirement 110-120V AC or 230-240V AC 50-60Hz, 24V DC (Optional)
Rated Power Output T-30A 30W T-60A 60W
Power Consumption T-30A 80W T-60A 120W
Frequency Resp. 20 Hz -20 kHz A?2 dB
Distortion (TDH) Less than 0.1% at 1 kHz, 1/3 rated power
Tone & Control Bass and Treble control and Master volume control are provided for overall tone control.
Treble a??12 to +10 dB at 10 kHz; Bass a??10.5 dB to 9 Db at 100Hz
S/N Ratio 80 dB (Tone controls in center postion)
Muting Switchable VOX operated override on inputs 1&2 equal priority
Output Speaker: 4Ic, 100V and COM;
Touch-proofed screw-terminal
Audio output: Line level(unbalanced jack 775mV); Tape level(unbalanced jack, 150mV)
Input MIC (1,2,3,4): 10mV, Balanced; 600 ohms
Aux (1,2,3,4): 150mV, Unbalanced RCA, 10k ohms
Input sensitivity MIC: -55 dBV(1.8Mv), AUX line inputs:-20dBV (100mV)
Phantom Power MIC (1,2,3,4) 12V
Indicators Power, signal, peak indicator
Protection Circuit Short-circuit and high temperature
Finish Panel: aluminum plate, Black or golden (optional)
Case: Steel plate, black, paint
Weight (Kgs) T-30A 8.7 T-60A 9.6
Dimension (mm) T-30A/60A/120A: 440 * 296 *90