The machine features of this model:(VS-S)

(a) Applicable for all kind of LSR products in different grades.

(b) Approximately 50% save of the space compare to horizontal type.

(c) Uses advanced touch screen, may the easily setting each different product the parameter value by use finger.

(d) Appropriate for insert molding products are required.

(e) The vertical device of hydraulic pressure ensures precision of forming mold.

(f) Automatic forming is available as taking out device is installed.

(g) Automatic device of insert molding.

(h) To economize the use of color changed material and need not to wash the chamber by using the disassemble chamber.

(i) As injection pass through the static mixer, material mixed evenly and due to the minor pressure of injection, the smaller objects are most suitable.

(j) Material may not get hardened in disassemble chamber.


Standard equipments

1. The clamping mold system

(a) The photoelectric switch and the secure gates.

(b) The slider of platen.

(c) Mold closing pressure and speed adjust according to proportion.

(d) High-speed mold clamping and low-speed pressurize which helps protect the molds.

(e) Mold heating power source sensation controller.

2. Raw material injects the system

(a) Four section type of inject pressure controller.

(b) Four section type of inject speed controller.

(c) Inject the terminal maintenance pressure controller.

(d) The digital inject dosing device.

(e) Low temperature cold water loop device to prevent leakage of the nozzle.

(f) The suction pumps of feeding A & B materials.



Optional equipment & accessory

1.Dispenser of silicone component A.

2.Dispenser of silicone component B.

3.Dispenser of pigment.

4.Material saving model.

5.The exclusive injection chamber device for pigment.

6.The vacuum euipment.

7.The chiller.(For mold cooling use)