2000 is a managed Ethernet Media Converter System. It provides an ideal solution to extend the Ethernet services over fiber for fiber-to-the-home (FTTH) or fiber-to-the-building (FTTB) applications. The OnAccess2000 offers up to 15 media converter slots to accommodate all kind of different media converter type, such as 10/100Base-TX to 100Base-FX or 10/100/1000Base-TX to 1000Base-X media converter. OnAccess2000 network management solution allows administrators to easily configure features, monitor performance, and troubleshoot the system using a standard Web browser and Simple Network Management Protocol (SNMP)-based network management platforms.

Features

Up to 15 media converter slots in one chassis.
In-band network management communication with TS-1000 standard.
Up to 4Chassis stackable in management by RS232 cable link.
10/100Base-TX to 100Base-FX media conversion.
10/100/1000Base-TX to 1000Base-X media conversion
Single fiber to dual fibers conversion
Multi-mode fiber to single mode fiber conversion
Non-blocking store-and-forward architecture enables the forwarding rate to proceed at a full wire speed .
802.1p Class of Service with 2-level priority .
802.3x flow control for a full-duplex mode and collision-based backpressure for a half-duplex mode .
802.1Q tag-based VLAN with 12 bit VID.
Egress/Ingress rate management control with 2-level priority.
Remote loop back capability.
Remote power off sensitive.
Converter card exchangeable between chassis and remote unit.
Network Management

In Band: SNMP, Web-based HTTP and Telnet.
Out of Band: RS-232 Console.
Network Protocol and Standards
IEEE: 802.3, 802.3u, 802.3z, 802.3ab, 802.3ah, 802.1p, 802.1q, 802.1v, 802.3ad, 802.3x
IEFT: RFC1157 SNMP, RFC854 Telnet, RFC 1123/1493/1643 MIB
Port Configuration

10/100Base-TX RJ45 port and 100Base-FX SC port with single or dual fiber options.
10/100/1000Base-TX RJ45 port and 1000Base-X SC or LC port with single or dual fiber options.
100Base-FX and 1000Base-X port with single and multi-mode fiber options.
Optical Interface Options


100Base-FX�G
2 Single single-mode fiber, dual wavelength 1310 / 1550nm, SC connector, operating distance 15 / 25 / 40 / 60km
2 Dual single-mode fibers, single wavelength 1310 or 1550nm, SC connector, operating distance 15 / 25 / 40 / 60km
2 Dual multi-mode fibers, single wavelength 1310nm, SC connector, operating distance 2km
1000Base-X�G
2 Dual multimode fiber (50/125 �g m), single wavelength 850nm, dual SC or LC connectors, operating distance 550m
2 Dual multimode fiber (62.5/125 �g m), single wavelength 850nm, dual SC or LC connectors, operating distance 275m
2 Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual SC or LC connectors, operating distance 15/40km
2 Single single-mode fiber, dual wavelength 1310 / 1550nm, SC or LC connector, operating distance 15 / 25 / 40
Power Supply Options

AC90~264V/1.2A max, 50/60Hz, or
DC36~72V/1.5A.
Power Consumption: ~35W

Physical and Environmental
Dimensions: 19-inch rack-mount width, 2.0U height.
Weight: 9Kg
Operating temperature: 0 �J ~ 50 �J
Storage temperature: -25 �J ~ 55 �J
Humidity: 5% ~ 95% RH Non-condensing.