Automatic aluminum spacer bending machine LZJ01 (Siemens PLC)

Whole machine size: 10500mm (length)*2100mm (width)*2600(height)
Air supply: 0.6mp
Power supply: AC 220V 2.5KW 50 HZ
Aluminum spacer size: width: 5.5mm-24mm
Length: 2000-4000
Aluminum spacer size: min 250*150mm
Max: 2500*2500mm
Processing speed: 30sec/pcs (1000mm*1000mm normal spacer)
Weight: 1800kg
The processing database set 4 groups of specification, 8 kinds of size, 9999 piece at the same time.

Main function and features:
1. The startup was controlled by single button, and it is adopted touch screen.
2. The head of the cutter can be adjusted automatically. It can operate without changing the cutter aluminum spacer when the width of the spacer is bigger than 6mm.
3. Adopted digital control for 6mm Fuji servo feeding system, and digital control system for the bending angle, siemens control system.
4. Reconnecting the ends automatically, and also it can avoid the ends being clashed intelligently, and judge the processing data intelligently.
5. processing the permanent again, so that there will no tailings exist.
6. The feed supply automatically when the processing is done.
7. Counting the output.
8. Remaining dormant state to save energy consumption when there is no processing.
9. Adopting the emergency stop.
10. Adjusting the bending speed automatically.
11. Performing the processing at a high speed, efficiency and continuity.
12. Adopting an automatic storage tank which can feed the material automatically and reconnect the aluminum spacer automatically.
13. Can bend both the arc and shaped aluminum spacers.
14. Manual control to debugging the trial run.
15. The head of the cutters is adjustable and processing data can be figured by customers themselves.
16. Indicating the relevant information when there is no supply, when it is in dormant state, when there is any malfunction, when it is in working state, and even can indicate debugging information for any wrong with the machine.
17. Adopting clock to display the current date and time.
18. Can change the automatic storage tank automatically (optional)
19. Can spray and paint the logos and nameplates (optional)

Automatic aluminum spacer bending machine LZJ01 (Siemens PLC)

Whole machine size: 10500mm (length)*2100mm (width)*2600(height)
Air supply: 0.6mp
Power supply: AC 220V 2.5KW 50 HZ
Aluminum spacer size: width: 5.5mm-24mm
Length: 2000-4000
Aluminum spacer size: min 250*150mm
Max: 2500*2500mm
Processing speed: 30sec/pcs (1000mm*1000mm normal spacer)
Weight: 1800kg
The processing database set 4 groups of specification, 8 kinds of size, 9999 piece at the same time.

Main function and features:
1. The startup was controlled by single button, and it is adopted touch screen.
2. The head of the cutter can be adjusted automatically. It can operate without changing the cutter aluminum spacer when the width of the spacer is bigger than 6mm.
3. Adopted digital control for 6mm Fuji servo feeding system, and digital control system for the bending angle, siemens control system.
4. Reconnecting the ends automatically, and also it can avoid the ends being clashed intelligently, and judge the processing data intelligently.
5. processing the permanent again, so that there will no tailings exist.
6. The feed supply automatically when the processing is done.
7. Counting the output.
8. Remaining dormant state to save energy consumption when there is no processing.
9. Adopting the emergency stop.
10. Adjusting the bending speed automatically.
11. Performing the processing at a high speed, efficiency and continuity.
12. Adopting an automatic storage tank which can feed the material automatically and reconnect the aluminum spacer automatically.
13. Can bend both the arc and shaped aluminum spacers.
14. Manual control to debugging the trial run.
15. The head of the cutters is adjustable and processing data can be figured by customers themselves.
16. Indicating the relevant information when there is no supply, when it is in dormant state, when there is any malfunction, when it is in working state, and even can indicate debugging information for any wrong with the machine.
17. Adopting clock to display the current date and time.
18. Can change the automatic storage tank automatically (optional)
19. Can spray and paint the logos and nameplates (optional)