Features:
1) Forward direction and reverse direction paper feeding modes
2) Emergency stop and free setting for original point
3) Max. speed: 500mm/s
4) Double photoelectric resetting without any collision
5) Perfect output without any saw tooth at high speed
6) Uses the most advanced subdivision circuit for low noise
7) Optional sound alarm system
8) Uses switching power supply, operation is not influenced by voltage
change
9) The circuit uses low power consumption and doesn't need fan for heat
radiation to ensure long and reliable operation
10) Quick speed and high accuracy
11) LCD display
12) Max. paper feed width: 420mm (16.9")
13) Real cutting range: 360mm x limitless length (14.2")
14) Cutting speed: 25 - 500mm/s
15) Cutter pressure: 25 - 400g, grade 16~32
16) Mechanic resolution: 0.0254mm/step
17) Interface type: RS232 serial interface
18) Bracket: free configuration
19) Supported software: Amiable Flexisign PRO, ArtCut 2005

Technical Parameters
1>.Power supply: 100-260V Switching type
2>.Power: 60-120W
3>.The max width of paper and max cutting width x length:
JD360: 355mm,350x53000mm 13.7inch
4>.Cutter: Inertial rotation
5>.Pen: Ball pen
6>.Cutting speed: 25-375mm/s in 15 steps
7>.Cutter pressure: 25-400g in 16 levels
8>.Mechanical resolution: 0.0254mm/step
9>.Selectable resolution of software: 0.0254, 0.0635, 0.05mm /step
10>.Repeated accuracy: 0.127
11>.Motor: Stepping motor
12>.Interface type: RS 232 Serial interface, centronic parallel interface
13>.Bit mode: 8data, 1 odd and even, 2 stopping
14>.Baud rate: 2400, 4800,9600,19200
15>.Dimension of whole machines/and Gross weight:
JD360: 560x250x230mm/12kg
16>.Language: Compatible with DM/PL drawing language
17>.Working ambient temperature : 0-35 deg C
18>.Working ambient humidity: 5-90% RH