�P Link loss budgets available from +3 to +142dB
�P 46 �� 1002MHz RF bandwidth
�P Enables very high rack density (14 transmitters per 3RU chassis)
�P +15 dBmV/channel RF input drive level
�P Superior flatness, ��0.5dB
�P Front access -20dB input test point
�P Front panel laser On/Off interlock switch
�P Open standard TCP/IP SNMP support
�P Local and remote RF level control and alarm level settings

LFOT AT3300G series 1 GHz 1310nm Transmitters provide increased bandwidth capacity for the expanding service demands of HDTV, VoIP, VOD and high speed DOCSIS. These transmitters are ideal for broadcast and narrowcast applications for optical transport with link losses ranging from 3 to 142dB. LFOT AT3300G series is available with either a single 46 to 1002MHz RF input or a dual RF input version for combining separate broadcast and narrowcast inputs within the transmitter. The dual input version is designed to provide 50dB isolation between the narrowcast and broadcast inputs to protect against NC crosstalk on adjacent transmitters via the RF drive network. An AGC option, available for the dual input version, compensates for variations in the RF input level to the transmitter to maintain constant transmitter output RF drive level to the laser. High density packaging enables network operators to install up to 14 transmitters per 3RU chassis, all of which can be monitored remotely or locally from the power supply module. Additionally, the compact single-width module design can be plugged in either the front or rear of the CH3000 3RU chassis to optimize equipment installation and operating conditions. The compact design minimizes rack space requirements in headends or hubs and enhances deployment of traditional HFC, passive HFC and fiber to the home (FTTH) networks.