Drawn cup needle bearings are designed to support radial loads and reduce friction between rotating components. The low cross section provides maximum load-carrying capability with a minimum of space required. Drawn cup bearings are easily installed with a press fit in the housing.

There are two basic designs: the full complement and the caged version. Both have a drawn outer shell that serves as a raceway for the rollers contained in the bearing. The full complement version has the maximum number of rollers mechanically retained by the drawn outer shell. This design combines high radial load-carrying capability with low cost. The standard caged version contains a one-piece steel cage to guide and retain the rollers. This design provides high speed and maximum lubricant retention capability.

Size range: 3 mm - 60 mm (1/8 in. - 5-1/2 in.) bore

Design Attributes�G
Integral seals
Side flanges (or separate end washers)
Inner rings
Oil holes
Single or double caged sets (or full complement) of rollers

Applications�G
Transmissions, transfer cases, engines and valve trains
Steering and braking systems
Axle support
Outboard engines
Power tools
Copiers, fax machines, paper-moving equipment
Appliances

HK Perforation Style Needle Rollers Bearing with Pressed Outer Ring

HK...RS Perforation Style Needle Rollers Bearing with Pressed Outer Ring, Single Surface with Packing Ring

HK...2RS Perforation Style Needle Rollers Bearing with Pressed Outer Ring, Double Surfaces with Packing Ring

BK Sealed Style Needle Rollers Bearing with Pressed Outer Ring

BK...RS Sealed Style Needle Rollers Bearing with Pressed Outer Ring, One Surface with Packing Ring

F Perforation Style Full Needle Rollers Bearing with Pressed Outer Ring

FY Perforation Style Full Needle Rollers Bearing with Pressed Outer Ring (Limit Grease Level)

MF Sealed Style Full Needle Rollers Bearing with Pressed Outer Ring

MFY Sealed Style Full Needle Rollers Bearing with Pressed Outer Ring (Limit Grease Level)