Shenzhen New Force Communication Technology Co.Ltd
UHF ANTENNA, ANTENNA, access control, 902MHZ ANTENNA, RFID ANTENNA, Manufacturer and Supplier - China
RFID 2.4Ghz Active Reader (NFC-2411E)
The NFC-2411E active reader can read large amounts of tags in very short time and in super long distance. It adapts to apply in logistics, personnel management and orientation, vehicle management and asset management etc.
More information pls contact: email@example.com
Functions Performance :
Optimization: Optimize performance of the NFC-2411E active reader in relation to widely-used active
tags so that to identify various tags and improve the ratio of performance to price of the system.
ID Matching: The reader is designed with nonvolatile storage space. In a closed applying system, it can save tag!ˉs ID
into this storage space in advance. The reader will compare the tag!ˉsID which identified by the reader with the tag!ˉs ID
saved in the storage space when the reader identify the tag!s ID, then run the action which predefined by reader or
designed by user depend on the comparing results.
Off-line Working: The reader is designed with nonvolatile storage space. Users can save the identified tag!ˉs ID into
this storage space to keep the applying system working steadily when the reader failed to communicate with the
Real Time Clock: There is a real time clock within the reader, which can setup and read when the reader identifying
the tag. By this designing the reader can identify tag under off-line working mode and record when it read the tag. Also
this designing supports comparing the real-time when the reader identifies the tag.
Input and Output: The reader is designed with one trigger input. When there is outer triggering, the reader can
identify the tag. This designing in accordance with environmental protection and reduce energy consumption.
Anti-interference: The channel isolation technique assures non-interference among different equipments.
3. Technical Parameters
Form 1.Technical parameters of the NFC-2411E active reader
Technical Parameters Specifications
Operating Frequency 2.4GHz--2.5GHz ISM
Identification Directionality Non-directional or directional（antenna dependent）
Antenna Connect 1 antenna through SMA
Max RF Power 0dBm
RF Power Range -20dBm-0dBm(adjustable through software)
Receiving Sensitivity -90dBm
Operating Method Fixed frequency(set via software)
Identify Tag Mode Identifying tag mode can be set as: Read tag in fixed time automatically, after external trigger or under software command.
Identify Tag Time Less than 1ms when identify single tag.
Reading/Writing Tag Time No more than 0.5ms when reading every 9 bytes, No more than 1ms when writing every 13bytes.
Reading/Writing Tag Range More than 60m when reading, 70% of reading range when writing(antenna dependent)
ID-matching Time The longest ID-matching time is 460us when 2000 ID.
Anti-collision Up to 100 tags read simultaneously.
Buffer Capacity 1000 tags data
Communication Speed 1Mbps
Communication Interface RS-232, RS-485, Ethernet, CAN,USB, Wiegand26/34/42/50, Ethernet
Input and Output 1 triggering input
Current/Voltage 1A/DC 5V
Working Temperature ﹣45℃～﹢75℃ (﹣49℉～﹢167℉)
Storage Temperature ﹣50℃～﹢85℃(﹣58℉～﹢185℉)
Working Status Indication buzzer, power light, reading light, RF light