Prodcut Briefing:

Olink Digital Video Server (DVS) digitizes analog video signals and sends digital images directly over an IP network, such as a LAN, intranet or Internet. It essentially turns an analog video system into a network video system and enables users to view live images using a Web browser or a video management software on any local or remote computer on a network. It allows authorized viewers from different locations to simultaneously access images from the same analog camera, as well as network cameras if they are added to the system.

Features

�� High-quality video from analog video sources
�� Direct connection to 10/100BaseT Ethernet netwoks
�� Independent system with embedded web server
�� Remote configuration and status using web-based tools
�� Top advanced arithmetic-H.264 (MPEG4 Part 10) video compression.
�� High stability-Double system, double safety, more stable.
�� excellent image quality-D1 down to CIF resolution.
�� Professional audio-MP3 audio format, mono or stereo is selectable.
�� Self-adjust the frame rate according to the network width to make network continuous transmition.
�� Support auto-connection when the network is cut.
�� Delay time is less than 150 MSEL(0.15 second) in Lan system.
�� Support real watermark technology so that compressed image file can��t be juggled.
�� Built-in motion detection and powerful event management

Specification:

>> Video

Compression: Hardware H.264 (MPEG4 Part10)
Input interface: 4 CH BNC
Input level: Vpp=1V
Signal format: PAL/CCIR625 Line 50 Field NTSC/ EIA525 Line 60 Field
Output bit rate: 64Kbitps-2048Kbitps
Output frame rate:CIF:25Fps/30Fps,Half D1:25Fps/30Fps,Full D1:25Fps/30Fps (NTSC/PAL,per 1ch)
Resolution: 704*576(P) 704*480(N) 704*288(P) 704*240(N) 352*288(P) 352*240(N)

>>Audio

Compression format: MP3
Input interface: 4 CH Microphone input( Vp-p=100Mv)
Sampling rate: 16K
Output bit rate: 8kbps��24Kbps

>> Communication

Web server: Built-in web server which is IE V6.0 or above
Dynamic IP: support internet connection assigned with dynamic IP address
Max. simultaneously users: 10
Interface: RS485 P/T/Z decoder interface and Keyboard interface�BRJ-45 10M/100M Ethernet interface
Network Protocol: TCP/IP�BUDP�BMULTICAST
Network transmission mode: ISDN�BADSL�BLAN, WAN

>> Alarm

Interface: 4CH alarm input, 4CH alarm output
Motion detection: Yes
Pre-record: 5-30 seconds
Post-record: 30-120 seconds

>> Hardware

Power supply: AC 110V-220V ,50/60Hz
Power consumption: ?6Watts
Dimension�G165��130��40mm
Temperate�G-10�X70 �J
Humidity�G5%-95% Non-Condensing