Automatic Faucet

Specification

Power Source:
DC: AA Alkaline Battery x4 (DC 6V)
Water Pressure Range: 0.5 kgf /cm2~8 kgf/cm2
Connection:
The minimum basin hole: >1 (25mm)
Aerator: 2.2 GPM laminar, non vandal proof (optional)

Electronic Control:
Activation: Put hand within sensing range, water will start flowing, red LED flash once.
Auto Shut Off: 30 sec.
Low Battery Indicator: Unloaded, voltage lower than 4.9V+-0.2V red LED keep flashing, water close.
Battery Valid 4.5 years after delivery.
Battery Life: 400,000 on/off times.
Inlet pipe spec.: PS 1/2”

Environment Spec.
1. Fluid Temperature: 1~75 deg. C, no frozen.
2. Allowed Environment Temperature: 1~50 deg. C
3. Allowed Environment Humidity: Below 80% Rh

Sensor Range
1. Sensor Range: 12cm~20cm, six section of sensor range settings.
2. Factory Preset Distance: 15cm +- 2cm (the fourth section)