Enable CF to be used like Solid State Drive (SSD)
Connects up to 4 CF - type I/II cards
CF can be configured as 4 individual drives or in RAID 0, RAID 1, RAID 10*
CF card can be used as boot device or for extra storage
Fits standard height or low profile system
LED connector for power and drive activity
Supports UDMA, DMA, and PIO modes
Supports DOS, Windows 98/ME, NT 4.0, 2000, XP, Vista, Linux kernel 2.4+
*note: Only fixed disk type Compact Flash can be used to create RAID sets. Removable type CF can only be used as individual drives. Use the SilCfg Management utility to see whether the CF card is fixed disk or removable type CF. Otherwise, use Diskpart which is included with Windows XP.
Specification
Connect up to 4 Compact Flash Type I /II cards
CF slot 1 and 2 support Type II and MicroDrive
4 CF can be set as individual drive or as RAID 0 (Striped), RAID 1 (Mirrored), and RAID 10 (Mirrored Striped)*
CF card can be bootable device containing OS and application
SiICfg Management Utility under Windows for RAID and device status / report
LED connector(HDD_LED) for Power and Drive Activity
PCI BUS slot compatible
Compliant with PCI specification, revision 2.2
Integrated PCI DMA engines
32-bit, 33MHz fully compliant PCI host interface
Supports UDMA, DMA, and PIO modes
Features one 256-byte FIFO (32-bit x 64 deep) for host reads and writes
Features command buffering from the PCI to CF
Features Virtual DMA: Bus master transfer on the PCI bus and PIO transfer on the ATA Bus
Supports DOS, Windows 98/ME, NT 4.0, 2000, XP, Vista, Linux kernel 2.4+
*RAID 10 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring

Included
1 x Quad-CF PCI Controller card
1 x User manual
1 x Software CD driver