Hongdu Testing Equipment Co., Ltd.
Manufacturer and Supplier - China
Power Plug Integrated Tester (HD-104) (HD-104)
This tester is a integrated tester for plug. It is used to test the continuity, insulation, high-volt, leakage current of power plug. It meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC etc. It is a totally automatic testing machine make your operation more convenient and simple.
* All of the test subjects will done automatically.
* The inner high-volt output value is adjustable.
* Test speed is quick, all test subjects will be achieved in 2 seconds.
* The PLC control system comes from Mitsubishi, Made In Japan.
* The relay comes from Schneider, Made In French.
* If the specimen is incompetent, there is a alarm by buzzer and light.
* If the specimen is incompetent, this machine will stop at once and show you which subject is incompetent. Until you push the emergency button it will restart to a new test. And a switch with key can be made to order to replace the high-volt starting button, it is very useful, because when a alarm happen, the operaters can not restart this machine, only after the managers have checked over and restart it by key the machine will work again.
* When test over, the sample will be pushed out automatically, and a "T" or other characters will be marked on it(English characters only).
1, Inner high-volt is applied between L, N, E wires, and the outer high-volt is applied between L, N, E wires and jacket.
2, Both 3-wire and 2-wire power plug can be tested by this machine.
Polarity test Test E, L, N wires in sequence
Insulation test high-volt DC 500V +-10%
Insulation resistance 2, 7, 20.50, 100MΩ (can be made to order)
Inner high-volt 0~5KV +-5% (adjustable)
Outer high-volt 4.2KV(fixed)
Leakage current 0.5, 1, 2, 3, 5, 8mA(can be made to order)
Rated power 500VA
Cylinder power compressed air with 0.4 to 0.6Mpa
Dimensions 465mmW, 360mm D, 470mm H
Power source AC 220V +-10%, 50Hz
Weight 35 kg, approximate