hebei bazhou deli power tools factory
Manufacturer and Supplier - China
CONDUIT ROD/ DUCT ROD & CABLE PULLING - DUCT (DL)
Duct Rodders are composed of fiber glass rod which was extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer, which make duct rodder cover sliding on surface, durable, corrosion resistant and has good insulation performance, which make them safe for use in cable occupied duct.
High Density polyethylene (Grade: for the insulating and jacketing of Telecommunication Cables) is used in the outer diameter coating.
Duct Rodders will equipped with different size reel according to the length of rod. There are wheels on the reel, which make it convenient for moving.
Light weight, durable, resistance to acid, alkali, aging resistant, corrosion resistant.
High tensile strength and bending properties, which make it to go through narrow pipes easily.
Good temperature adaptability, the product will not soften in hot weather / nor become brittle in cold weather. Its usability will not be affected by temperature.
Outer protect layer are made of high density polyethylene engineering plastic, which has good anti-UV capability.Cover was coated with long-term UV-resistant polyethylene.
Its surface has the advantage of smooth, wear-resistant and long service life.
There are meter marks on the protect layer of duct rodder, which can be used for measuring distance. Marks are printed by professional printing machine, which has the advantage of strong adhesion, clear writing, waterproof, anti-ultraviolet, it can be still clear even after using many times.
There are several kinds of colors for the rod for your chosen.
Fiberglass duct rodder & fiberglass duct rod & duct rodder cable & conduit rodder & cable rodder
--Bazhou Dpair power tools
Duct Rodders applies in tow lead-rope through a pipe,it is auxiliary means. Surface smooth and high resilience,so the FRP perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm ,can resist the adverse circumstance).Duct Rodders has time-saving reducing effort, improving efficiency, etc,And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;When arranges the cable,you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable
Fiberglass duct rodder features&benefits:
1. strong non-conductive fiberglass rod construction
2. stainless steel drawing head
3. for longer conduit runs and underground duct
4. Rugged tubular steel reel with adjustable position.
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling
7. Anticorrosion , good elasticity , long working life.
Fiberglass push pull, Tracing Duct Rods,Duct Rodder--Bazhou Dpair power tools
1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder .
2.Fiberglass push pull,Fiber snake duct rodder,cable rods
3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile
Glass fiber rod diameter(mm)
650 x 250 x 680, 1000 x 470 x 1140, 1230 x 470 x 1350
75-80% E-glass fiber +High density polyethylene(outer)
Add metal(copper wire, stainless steel wire)in the rod for detectable purpose
Wrapped and then carton box
frp duct rod, Fiberglass rod,Fiberglass rod，Duct Rodder,Fiberglass duct rodder,Duct rod--Bazhou Dpair power tools
Technical Data of Duct Rodders
1 - Glass Reinforced Composite core:
Keinforcement E-Glass Fiber
Glass Content of Inner Part 75-80%
Material of Pulling Rod Epoxy fiber glass (inner)
High density Polyethylene(outer)
Density ＞1.9 gr/cm3
Diameter Tolerance ± 0.10mm
Work situation temperature - 40 0C to +800C
Minimum pulling strength 4000 N±5%
Tensile Modulus ＞30000 Mpa
Consistency of rod 150gr/m±5%
Flexural Modulus ＞30000 Mpa
Elongation at Break 2.5-3%
Min. Bending Radius 400mm
Water Absorption ＜0.15% after 24 hr.
2 - Polyethylene cover
Medium Density Polyethylene Resin for the insulating and jacketing of Telecommunication Cables.
Tensile Strength ＞15N/mm2
Environmental Stress & crack resistance >1000 hr.
Heat Stability OK.
Carbon Black OK.