Tensile strength: 6-10Mpa
Hardness: 50-80Shore A
Elongation: 200%-500%
Specific Gravity: 1.20-1.40g/cm3
Tear strength: 17--25 N/mm
Working temperature: -60/200℃
thickness: From 1 to 50mm
Width: From 0.90 to 2.0m
Executable standard: BS2752 - C40
Surface Finished: Smooth or cloth impression
Properties:

‧ Excellent resistance to heat (dry air), at 200 C continuous

‧ Resistant to ultra-violet light, ozone and weathering.

‧ Exhibits low flammability and low smoke toxicity.

‧ Good electrical insulation properties.

‧ making it the preferred choice of the medical, pharmaceutical and food processing industries.

‧ Silicones have comparatively low mechanical properties, tensile strength, elongation and tear strength, however they keep constant even at high temperatures but should not be used with high pressure steam.

‧ Resistance to chemicals; its resistance to oils and hydrocarbon products is fairly limited and similar to that of Chloroprene rubbers. Reasonable resistance to a whole range of general chemical products, but acids, alkalis, esters and ketone should be avoided

Specification(thickness*wideness*length):1-30mm*0.6-2m*1-20m