The Ferrite Magnets including ''Isotropic'' and ''Anisotropic'' are sintered magnet with either by dry pressed or wet pressed. Tooling is always needed when pressed. The magnetization can be done by axially, radially, multi-poles axially, and multi-poles on circumference etc. Due to the low cost, medium power and productivity by mass production, so they are widely used in various industries for many different applications. We can say that the Ferrite magnets were most popular one in magnetic materials for past about 30 years.

Physical Properties:
Curie Temp.: 450 degrees centigrade
Max. Operating Temp.: 250 degrees centigrade
Hardness: 420 ~580 HV
Density: 4.50 ~ 5.10 g/cm3
Recoil Permeability: 1.05 ~ 1.20 M rec
Temp. Coeff.: - 0.18 % / degrees centigrade
Extension Strength: < 100N/mm2
Horizontal Strength: 300 N/mm2
Resist-Break Strength: 5 ~ 9 kgt/mm2
Compress Strength: > 70 kgt/mm2

Application:
Micro Motors
Adjustment of DY Core
Dynamos
Health Therapy
Convertible Motors
Audio Speakers
Linearity Coil Sensitivity
Door Catches
Magnetic Separator
Education Application
Water Pump
Magnetic Instrument
Auto Parts
Button Parts
Clock Parts
Magnetic Coupling
Magnetic Holders
Sensors
Bell & Buzzer
Others

Features:
Easy magnetization
Coating & Plating are available
Lower Cost
Short lead time
Medium power
Multi-poles & Single-poles magnetization available