|
|
Sell SHURE LX88II Dynamic Wireless System  (LX88II ) | | |
 Product Feature | Features:
The LX88-II Wireless System is the finest in its class. This system will give you
excellent performance for years to come.
SYSTEM CONTENTS
The LX88-II Wireless System contains the following components:
* One LX88-II dual channel wireless receiver
* Two transmitters available in one of three different combinations (see Combinations System below)
Combinations
* Two antennas
* One PS20 (120 Vac) or PS20E (230 Vac) power adapter
* One hardware kit
* Two rackmount brackets
System Combinations
The LX88-II system includes one of the following three transmitter combinations:
* Two handheld microphone transmitters (includes two swivel adapters and two
anti-roll devices)
or
* Two body-pack transmitters
or
* One handheld microphone and one body-pack transmitter (includes one swivel adapter and one anti-roll device) | | | |
| Product Specifications | Technical Details:
* RF Carrier Frequency Range: 169.445 to 221.350 MHz
* Working Range: 100 m (approximately 300 ft) under typical conditions.
* Audio Frequency Response: 50 to 15,000 Hz, A©I2 dB.
* Audio Output Level (A©I15 kHz deviation, 1 kHz tone)
* XLR connector (into 600 W load): a??20 dBV (mic)
* 1/4a??inch connector (into 3 kW load): a??8.8 dBV (Hi Z)
* 1/4 inch connector (into 3 kW load): a??18dBV (mix)
* Gain Adjustment Range:
LX1: 40 dB LX2: 25 dB Impedances
LX1 (input): 1 MW
LX88-II (output): 600 W (XLR); 5 kW (1/4-inch phone jack)
* RF Power Output:
LX1, LX2: 50 mW maximum (complies with FCC and IC regulations)
* RF Sensitivity: a??101 dBm, typical
* Audio Polarity:
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 with respect to pin 3 of low impedance output and tip of high impedance 1/4-inch output.
* System Distortion (ref. A©I15 kHz deviation, 1 kHz modulation) 0.7%
* Power Requirements:
LX1, LX2: 9V alkaline battery (Duracell MN1604 recommended). 8.4V Nicad (re- chargeable) are optional but not recommended.
LX88-II: 12 Vdc (PS20, 120Vac; PS20E, 230 Vac Power Supply)
* Current Drain:
LX1: 31 mA average (40 mA max), LX2: 30 mA average (35 mA max) LX88-II: 160 mA average (195 mA max)
* Operating Temperature Range:
-20A¡«to 50A¡«C (-4A¡«to 122A¡«F). NOTE: Battery characteristics may limit this range.
* Overall Dimensions:
LX1: 82.6 mm H x 63.5 mm W x 26.2 mm D (31/4 x 21/2 x 11/32 in.) LX2/58: 241 mm L x 50.8 mm Dia. (91/2 x 2 in.)
LX88-II: 44 mm H x 349 mm W x 194mm D (1 3/4 x 13 3/4 x 7 5/8 in)
* Net Weight:
LX1: 79.5 g (2.8 oz) without battery LX2/58: 294.8 g (10.4 oz) without battery LX88-II: 1.7 Kg (3.7 lbs)
* Certification:
LX1, LX2: Type-accepted under FCC Parts 90 and 74; IC certified under TRC-78
*************
If you are interested in it.
Please email me:are_dow@hotmail.com
You will get a good price.
| | | |
| |
