Join Us |Sign In | User Guide | Inquiry Cart (0) Join Us |Sign In | User Guide | Inquiry Cart (0)Shenzhen Huiqitong Xing Electronic Co.,Ltd
access control, RFID card reader, card reader, proximity card reader, card access, Manufacture and Supplier - China(CN)
Separated Controller and Reader (Q2000-E )
Q2000-E Build-in access controller and External Card Reader
Specification
Supply Voltage: DC12V
Working Current: less than 1000 mA
Static current: less than 80 mA
User capacity: 200 Cards
Read Card distance: more than 10CM
Read Card type: EM Card or Compatible with EM Card
Operation Temperature: -10XC-70XC
Operation Humidity: 10%-90%
Access control machine program method
1. User Card Register
*Press Key # six times, the Buzzer make long sound BI, POWER (Red), OK (Green), Mode (Yellow) is on at the same time.
*Input 5 digits PIN (Default Password is 12345), OK (Green) is off. The machine enters Making Program Status.
*Press key 2, MODE light (Yellow) is on, POWER (Red) and OK (Green) light are off.
*Input 4 digits User ID (Such as: 0008), the POWER (Red) and OK light (Green) flash.
*Read the user card that needs log in, a sound BI will be heard, POWER light (Red) is off, OK (Green) and MODE light (Orange) are on, the user card is registered successfully.
*Press Key 6 to Exit programming status.
2. Other Setting
Change Program Operating Password
*Press key 1, The MODE (Yellow) light is on, POWER (Red), OK (Green) light is off.
*Input PIN as your will (Example, 23456), the Buzzer make a short sound of BI, OK (Green) is on, POWER (Red), MODE (yellow) is on, PIN has changed successfully. Note: The PIN should be kept; you will need it to enter the Making Program Mode next time. If PIN forgotten, please execute Machine Initial Step.
Delete the single user card
*Press key 3, MODE light (yellow) is bright, POWER (Red) and OK (green) light are off.
*Input 4 digits user number that needs to be deleted. (Series No on card, such as: 0008), a sound BI will be heard. This means the deletion is successful.
Delete all registered cards
*Press key 4, BI will be heard twice. All the registered cards and passwords are deleted.
Open Door Time Setting
*Press key 5, MODE light (Yellow) is bright, POWER (Red) and OK (Green) are off.
*Input 2 character as the door open time (Such as: 05, means that the door open time is 5 second), sound BI will be heard twice, this means the door open time setup is successful.
6 is Exit Key
Note: The default open time is 3 second
