AdapterE2P is designed to connect the latest generation of ExpressCards to older notebook computers with existing PCMCIA ports. The AdapterE2P seamlessly converts input from new ExpressCard modules to a PCMCIA compatible format. Data can be transferred at rates up to the full speed supported by the PCMCIA port in the laptop.

The AdapterE2P is easy to set up. It requires no driver, just install the driver associated with the ExpressCard device you are using, insert your ExpressCard into the E2P and insert the combined cards into your notebook��s PCMCIA slot. You can insert and remove the combined E2P/ExpressCard into your PCMCIA slot without rebooting. You can also leave the E2P in the laptop and only insert and remove your ExpressCard.

Features

�� Connects new ExpressCard devices to older notebook computers with PCMCIA slots

�� Fits standard Type II PCMCIA slots

�� Works with standard USB/ExpressCard devices

�� Data transfer rate up to PCMCIA card interface maximum

�� WindowsR and Mac OS X compatible

�� No driver necessary other than the driver that comes with the ExpressCard device

�� Convenient 1 part module that only extends the ExpressCard by (20mm, 0.8��)

System Requirements

�� Requires WindowsR 98, 2000, XP family, or Mac OS X 10.4.8

�� Standard PCMCIA slot for Type II (5mm) cards.

ExpressCard Compatibility

�� All standard USB electrical interface ExpressCards

�� Cellular broadband cards

�� Memory cards

�� Modem cards

�� 802.11a/b/g wireless LAN cards

�� Will NOT work with native PCI Express interface cards - (Gig Ethernet, SATA and Firewire) PCMCIA are not able to accommodate these faster interfaces

Dimensions

�� Card interface module:54 mm x 88 mm x 9 mm (2.1 x 3.5 x 0.4 inch)

�� Total weight: 18 grams (0.7 oz)