1>X, Y working area: 1300x2500mm
2>Z working area: 200mm
3>worktable area: 1480x3000mm
4>Interface: USB
5>Command: G cord*.u00*.mmg*plt
6>Surroundings for software: DSP
7>Power (not include the spindle): 1840W
8>Power: 380v 50Hz
9>Main shaft power rate: 4.5/KW
10>Main shaft rotating speed: 0-24000rpm/min
11>Work mode: Stepper
12>Net weight: 1300kg

∥full steel structure
∥Y axes adopt double drives
∥High strength steel tube jointing body.
∥six sub area vacuum table-board
∥specialty 3D control system
∥select automatic orientation system and temperature control system

Whole thick steel structure, imported
Square orbit, gear-wheel driver, two motors for Y axis,
USB DSP control system, Wentai Software and
Type3 Software, 4.5kw (imported bearing) water
Cooling spindle, vacuum table, no oil vacuum
Pump and dust collector system with 6 zones
Separately control, dust cover, Auto oiling,
10 cutters (��6, ��12.7), 2 collets, plywood packing,