The TRANS-AUDIO TK700 loudspeaker enclosures provide a versatile system that is designed for high quality distributed sound reinforcement or high performance monitoring or fixed installation.
The loudspeaker��s high-frequency section comprises a 1-inch diaphragm compression driver coupled to a symmetrical (90 degrees horizontal by 40 degrees vertical) constant directivity horn. A pair of high-power 15-inch magnet cone drivers , mounted in an optimally vented enclosure, reproduces low frequencies.

Frequency range (-6dB) 40 Hz to 20k Hz
Sensitivity ( f>80Hz) 99dB
SPL (AES) 126dB SPL
Peak SPL 129dB SPL
Nominal directivity ( -6dB) 90�X horizontal, 40�X vertical
Nominal impedance 4 Ohm
Transducers 15" (380mm) bass driver
1" (25.4mm) compression driver
Rated Power 700W AES, 1400W peak
Recommended amps 500 to 1200W into 4 Ohms
Cabinet 18mm plywood with internal reinforcements
Crossover Air core inductors, MKP capacitors, wirewound resistors Finish:BLACK
Protection grill Acoustically transparent perforated steel,1.5mm thick
Connectors 2 x Neutrik SPEAKON NL4MP
Handles 2 integrated handles on side
Mounting on stand Put it on ground
Rigging:5 standard points
Dimensions (H x W x D) 1200 x 480 x 450 mm
Weight Net unit weight 53kg
Gross weight, packed 56kg
1. Sensitivity is the average SPL measured over the component s rated bandwidth
2. Power rating displays the long term AES power handling capacity using pink noise with a 6 dB crest factor over the component.s rated bandwidth
3. Directivity is averaged over the 1000Hz-12 kHz range.
4. The SPEAKON cables are wired, hot pin 1+, cold pin 1-.