CCPAM2300 SDSL
1. Specification
-Line Interface
-Line Port : RJ-11, 1Port,2 Wire
-Data Rate : 256Kbps-2320Kbps(Data speed setting as dip switch)
-Data distance : 6Km-2.5km(256Kbps-2320Kbps),0.4mm Line
6.8km(256Kbps-2320Kbps),0.5mm Line
-Ethernet Port : IEEE 802.3 10Base-T, RJ-45 connector, 1Port
-Phone Interface: RJ-11 , 1Port, Phone Line/Voice Line
-Line Vode: 2B1Q modulation
-LED Indicator: PWR�BLNK�BACT�BCO�BDSL�BACT
-Envirnment
-Operation Temperature: 0�XC to 60�XC
-Storage Temperature: -10�XC to 70�XC
-Operation Humidty: 0% to 90% ,
-Storage Humidity: 0% to 90%
-External Power : 220VAC/DC9V/1000mA, 50-60Hz
-Dimension: 208mm(W)*45mm(H)*211mm(D)

LED Indicator Function

1�^ Power: Power ON/OFF
2�^CO�GMaster or Slave Indicator
3�^LNK: Ethernet Network link Indicator
4�^ACT: Ethernet Data Transmit Receive indicato
5�^ DSL: WAN line Interface link Indicator
6�^ACT�GDSL Data Transmit Receive indicator

Rear side

1) Power: Power Socket
2) Line : DSL WAN Line interface
3) LAN: HUB and Network Line Connector
4) Phone: Voice and PSTN Line Connection

2. Switch setting

1) Master and Slave setting(Switch 5)

2) Data rate setting (Switch1-4) Data rate switch table

1 2 3 4 Kbps 1 2 3 4 Bit/s
ON ON ON ON 256 ON ON ON OFF 1280
OFF ON ON ON 384 OFF ON ON OFF 1408
ON OFF ON ON 512 ON OFF ON OFF 1536
OFF OFF ON ON 640 OFF OFF ON OFF 1664
ON ON OFF ON 768 ON ON OFF OFF 1792
OFF ON OFF ON 896 OFF ON OFF OFF 1920
ON OFF OFF ON 1024 ON OFF OFF OFF 2048
OFF OFF OFF ON 1152 OFF OFF OFF OFF 2304

Application:

�@�BPoint to Point



�G�BDSLAM to Point