Floating Coil Heat Exchange Displacement Heat Exchanger is the most popular exchanger Our company sums up our own experiences seriously, collects the feedback information from the market and improves and optimizes technology all along during the more than ten years production process; to make the product structure more rational and the performance more superior.
Displacement Floating Coil Heat Exchange is widely used in the domestic water supply system in the civil and industrial buildings like hotels, restaurants, organs, schools, hospitals, factories, mines and so on, for it has possess the considerable storage volume of water.

It has the following advantage:
High Heat Transfer Coefficient:
2100��3200 kcal/m2/h. (2400��3720W/ m2/h.�J). (Steam-Water)
1210��2100kcal/m2/h.�]1410��2460W/m2. �J�^(Water-Water)
Large water storage quantity, has not dead water region almost, high volume utilization rate, little head loss, safe and stable water supply effect.
Little floor space
The condensate water ��s temperature is dropped to be lower than 50�J�CHigh energy-saving effect.
Accurate Temperature Regulation, The temperature of outlet water is remained in the range of 2�J to the set point under the condition of load fluctuation.
Remove the fouling automatically, Little working noise, Convenient repairing and management, Long service life.
Heat Exchange Component��s Material: Red Copper.
Shell Side Material: Carbon Steel or Stainless Steel, may choose the copper plate-lined or stainless steel-lined carbon steel
Hot Mediator: Steam or Hot Water.
Tube Side Pressure: not higher than 1.6Mpa
Shell Side Pressure: 0.6Mpa, 1.0Mpa or 1.6Mpa
Volume: Vertical: 0.8-15.0m3 (Steam-Water), 1.8-20.0 m3 (Water-Water)
Horizontal: 0.8-20.0 m3 (Steam-Water), 0.8-20.0 m3 (Water-Water)
Diameter: 900-2200mm
Heat Exchange Area: Vertical: 4.0-45.0m3 Horizontal: 4.0-35.0 m3