Sumip luminaries are available in totally enclosed GRP housing suitable for use in non hazardous, dusty, humid & corrosive atmosphere prevailing in Chemical, Fertilizer, Cement, Rayon Plants, and also Industries/Power Plants located in coastal areas.

Construction
The luminaire housing is Hot Press Molded Glass Reinforced Plastic (GRP).

Glass
Wellglass - Heat resistance glass is provided with synthetic rubber gasket.
Highbay/ Mediumbay - Teflon glass with rubber gasket provided.
Retaining frame/ Wire guard
Strong stainless steel wire guard is provided to hold & protect the well glass.

Holder
Ceramic ES or BC lamp holders are provided as per customer requirement of high grade quality.

Ballast & Igniter & Capacitor
For Integral type luminaries Heavy Duty Copper Wound Ballast, Capacitor & Igniter where ever applicable, are fitted right above the lamp holder assembly.

Entries
One no 3/4" BS conduit entry is provided for incoming cable with Brass/ Polyamide cable Gland with check nut.

Hardware
All hardware provided are SS 316.

Suspension
FRP Coated Eye Bolt is provided on top with good quality grommet to absorb the vibration. Alternatively SS 316 Clamps can also be provided.

Street Light aluminum Luminaries has cast aluminum base with hinged fiberglass casing provided with
polycarbonate glass & high grade inbuilt reflector.
The enclosure opening is such that it makes pole fastening system, wiring plate & lamp compartment easily
accessible.
To minimize installation & maintenance time the enclosure can be opened by just turning one knob without need
of any tools.
For maintenance the wiring plate is completely removable simply by disconnecting two electric connectors &
loosening 3 screws.