The Electronic Controller orders the automatic start and stop of the water pump when opening or closing any tap or valve of system.The controller can keep constant pressure and water flow in the system as long as any tap in the system is open during the pump operation.

Voltage:220-240V/50HZ
Maximum current:10AMP
Restarting Pressure:1.5Bar or 2.2 Bar
Maximum working Pressure:10Bar
Connection:1"/25mm
Protection Rating:IP 65
Maximum Temperature Rating:60��C
Manul Start Switch:RESET
Tension LED:POWER
Pump Working LED:ON
Security LED:FAILURE
Special Non Return Valve to avoid surges
Security System removing the possibility of the machine working without water