|
|
electric lock,IC card lock,id card lock,ihotel lock  (100) | | |
 Product Feature | Features:
1) Function card
a) Mother card: it is defined on the lock, is used to set, create or terminate
guest card
b) Guest card: key of the lock, it is authorized by mother card
c) The lock works on the principle of remembering the card's ID, so one
card can be shared by all of the locks
2) Unlock the lock: touch the valid guest card or mother card to the hole in the
cover, then the lock unlocked
3) Unlocking mode: you can set the unlocking mode before installing the lock,
as chart below
4) Turn the mode button to the right (near the set button), when unlock, the
lock will lock automatically 5 seconds later (default mode)
5) Turn the mode button to the left (far from the set button), when touch
card to unlock, the lock will keep unlocking status, touch card again to lock
the lock
6) Issue mother card: press the set button, after a "tick", touch the card which
you want to become mother card to the lock, after a long "tick" and a short
"tick", the card is recognized as mother card by the lock. Each lock can
has only one mother card, the last one replaces the prior one. When
create mother card, the waiter cards and guest cards issued before will be
canceled
7) Issue guest card: touch the mother card to the lock for once, after a "tick"
and the LED lights in green, touch the mother card to the lock again before
the LED stops lighting, after a 'tick' and the LED flashes in green. Touch
the card which you want to become guest card to the lock; after a "tick" the
card is recognized as guest card by the lock (you can continue to touch the
other cards before the LED stops flashing. After 6 seconds you touch the last
card, LED stops flashing)
8) Cancel the specified guest card: method is the same with issuing guest card,
touch the mother card to the lock for once, after a 'tick' and the LED light
in green, touch the mother Card to the lock again before the LED stops lighting,
after a 'tick' and the LED flashes in green, touch the guest card which you
want to be canceled to the lock, after 2 'tick' the guest card is canceled
from the lock
9) Cancel all guest card: touch the mother card to the lock for 3 times
successively to cancel the entire Waiter card and guest card
10) Low voltage warning: if the batteries' voltage is low, when touch card
there will be successive quick "tick" from the buzzer, in case you have to
change the batteries
11) Unlock with the outside power supply: if the batteries' voltage is too low
to unlock, you can insert the outside battery box to the jack under the front
cover to supply power for unlocking
12) Steal alarm: when the cabinet door is closed, if some one press the mortise,
there will be successive "tick" from the buzzer. Touch the valid card to stop
the alarm
13) Note: please make sure that there are valid cards to unlock the lock before
closing the cabinet door | | | |
| Business Condition | | Supply Capability: | Features:
1) Function card
a) Mother card: it is defined on the lock, is used to set, create or terminate
guest card
b) Guest card: key of the lock, it is authorized by mother card
c) The lock works on the principle of remembering the card's ID, so one
card can be shared by all of the locks
2) Unlock the lock: touch the valid guest card or mother card to the hole in the
cover, then the lock unlocked
3) Unlocking mode: you can set the unlocking mode before installing the lock,
as chart below
4) Turn the mode button to the right (near the set button), when unlock, the
lock will lock automatically 5 seconds later (default mode)
5) Turn the mode button to the left (far from the set button), when touch
card to unlock, the lock will keep unlocking status, touch card again to lock
the lock
6) Issue mother card: press the set button, after a "tick", touch the card which
you want to become mother card to the lock, after a long "tick" and a short
"tick", the card is recognized as mother card by the lock. Each lock can
has only one mother card, the last one replaces the prior one. When
create mother card, the waiter cards and guest cards issued before will be
canceled
7) Issue guest card: touch the mother card to the lock for once, after a "tick"
and the LED lights in green, touch the mother card to the lock again before
the LED stops lighting, after a 'tick' and the LED flashes in green. Touch
the card which you want to become guest card to the lock; after a "tick" the
card is recognized as guest card by the lock (you can continue to touch the
other cards before the LED stops flashing. After 6 seconds you touch the last
card, LED stops flashing)
8) Cancel the specified guest card: method is the same with issuing guest card,
touch the mother card to the lock for once, after a 'tick' and the LED light
in green, touch the mother Card to the lock again before the LED stops lighting,
after a 'tick' and the LED flashes in green, touch the guest card which you
want to be canceled to the lock, after 2 'tick' the guest card is canceled
from the lock
9) Cancel all guest card: touch the mother card to the lock for 3 times
successively to cancel the entire Waiter card and guest card
10) Low voltage warning: if the batteries' voltage is low, when touch card
there will be successive quick "tick" from the buzzer, in case you have to
change the batteries
11) Unlock with the outside power supply: if the batteries' voltage is too low
to unlock, you can insert the outside battery box to the jack under the front
cover to supply power for unlocking
12) Steal alarm: when the cabinet door is closed, if some one press the mortise,
there will be successive "tick" from the buzzer. Touch the valid card to stop
the alarm
13) Note: please make sure that there are valid cards to unlock the lock before
closing the cabinet door |
| | | |
| |
