 | NGN Communication Co., Ltd (Manufacturer)
| |  |  |  | Digital Satellite Finder | |
 | | | | | | | Enlarge this image | | |
 | Product Feature | | The SF3000 Digital Satellite Finder Meter is an innovative professional satellite identification and alignment meter. This device is easy to operate. The signal strength and picture quality (BER) meter will speed up and improve your dish installation.
If you are a professional installer and want a finder that can identify a particular satellite, then this is the one!
It communicates with the satellite's digital transmissions with "Unique Satellite Information Data" (USID). While most pointing devices only give you a general idea that there are indeed satellites in the sky and allow you to peak the signal, the SF3000 takes you one step further by positively identifying the satellite.
Finder Master Software is included in a CD.
After selecting a country and city, the Finder Master Software will calculate the parameters to adjust the satellite dish automatically. The parameters include Azimuth, Elevation, and Polarization. They are displayed in graphic and table mode. This information can be downloaded by the RS-232 cable provided, from your PC to your SF-3000 easily and effectively to locate the satellites from your destination.
SF3000 with Accessories
Finder Master Software
SF3000 LCD Display
QUICK FIND FEATURE
With the Quick Find feature you select the satellite from the menu, move your dish until the SF3000 makes a "beep" sound. There will be an icon on the top right corner of the screen. That mean the satellite has been found correctly. Indicates RF signal level and bit error rates , carrier-to-noise rate, at the same time for best dish alignment and cross polarity adjustment.
Why drag a TV and satellite receiver to the roof, when you can do the whole job with just a small and easy to carry tool like this!
At less than 2 lbs in weight, you can carry it anywhere you want.
It has a LOOP OUT to connect to your receiver if you wish.
Don't waste your valuable time or money on cheaper analog meters. Use this professional meter for all you installations. This digital satellite meter will maximize the number of installations any installer can perform in a day and is very easy to use.
What used to take half and hour to an hour now takes a few minutes to find and peak the signal! Time is valuable, why waste it!
Improve your service call efficiency and speed.
FEATURES
Total software upgrade
Software stored in Flash memory for later upgrade
Pre-programmed with most regionally used satellites
Uses USID
Signal strength and Bit Error Rate (Picture Quality) displayed simultaneously.
Easy reading LCD display.
Back lit display.
Up to 80 satellites may be programmed.
Bar-graph for Signal Strength
Bar-graph for BER (Picture Quality).
Satellite settings store in non-volatile EPROM
Short circuit proof on LNB output.
Internal battery powers the LNB
Works with all stander, universal, linear (DVB) and circular (DSS) polarity LNBs
Weight approx less than 2 lbs.
Size approx: 9.84in W x 4.72in H x 2.36in D (250 x 120 x 60 mm)
Set satellite's related parameter which includes LNB frequency and working voltage (mode of polarization), satellite downstream frequency, symbol ate, 22K situation etc.
AZ, EL, and PO self-calculated for providing initial dish set-ups.
Align dish without IR/D, TV and power.
In alignment process, once a satellite is found by setting related parameter, we can adjust the dish's orientation and pitching angle according to inside audible tone
Measure RF signal level, bit error rate, carrier-to-noise rate and current.
Provides special software that can be used to check local position. AZ, EL, and PO for almost all big cities around the world in alignment process of a certain satellite.
Plans can be downloaded from a certain website by RS232 port.
|
| Product Specifications | |
SPECIFICATIONS
Frequency range: 950 to 2150 MHz
Input dynamic range: -65dBm to -25dBm
Symbol rate up to 2Msps to 45Msps
Input resistance: 75 Ohms
LNB supply: 13V and 18V 500 mA
DC power supply: DC4.8V rechargeable battery
Working time: 3 - 4 hours.
Charging time: more than 4 hours, less than 5 hours.
Power adapter input: AC110V / 60Hz / 220V / 50Hz
Power adapter output: 10.5VDC 1000mA
RS232 connecter for PC upgrade
Display: 124 x 64 wide-range temperature liquid crystal display.
Audio output: build-in speaker
Port: USB (default)
Switch: 22 KHz support
|
| Contact Information |  | | Contact Person: |  | | Phone: |  | | Fax: |  | | Business Address: | A4 Sifang Hi-tech Building,Nankai Industry Area, Ya,Tianjin,China(CN) | | E-Mail: |  |
PLEASE NOTE:
AsianProducts have not verified this company and their product. Therefore we cannot guarantee they will respond to all buyer communications. |
|  | |  |
| | |
Promotion 
Related Products 
