Thermoplastic paint is widely used for road traffic marking. It can be applied to cement road surfaces and asphalt surfaces by screed, spray or extrusion method.

Our product have follow characteristics:


Adhesion :The unique formulation ensures good adhesion to the road surface .Before construction ,brush some special priming paints (special for cement roadbed ) produced by our company which will make the cohesion stronger.

Antiskid: Content of antiskid agent, which makes the paint keeping excellent evenness and better antiskid, and maximum ensures the security of driving.
Reflection:There are sufficient pellicle-spraying high- quality glass micro-beads with stable reflection.Scientifically choose the mixed glass micro- beads with different proportions according to the settling rate of glass micro-beads in coatings,which ensures the old and new lineation always keeping good reflecting effects.

Drying fast: Provide different formulations to produce paint according to different temperature,humidity and the conditions of road in construction etc ,which ensures the coating with excellent drying speed and good antifouling properties.

Stability:Choose raw materials with excellent light and thermal stabilities.The paint which is used in the area under strong sunlight conditions add anti-ultraviolet agent,which ensures the line keeping original color and shine for a long time.

Anti-micro crack: The micro crack of line is a big technical problem in the road-marking industry home and abroad. After long-term research organized by our company, the approach that adding liquid materials with high-temperature resistance and functional structural raw materials has completely resolved the problem.

Technical parameters:

Proportions of constituents of mixture
Binder Content: 18.0-22.0%
Solid Glass bead content: 20%min
Aggregate pigment extender and solid glass bead content: 78.0-82%

Grading of combined aggregate,pigment, extender and glass bead coontent

BS sieve Percent Passing
2.8mm 100
600 micron 65-95


Properties
Density(g/cm3): 1.8~2.3
Softening point (degree C): 65 min
Luminance factor: 70% min
Heat stability: 65% min
Flow resistance: 25% max
Skid resistance: 45% min