 | Wenzhou Meterking(tools) Co.,Ltd. (Exporter, Manufacturer)
| |  |  |  | Ratchet Action Cable Cutter | |
 | | | | | | | Enlarge this image | | |
 | Product Feature | | brief introduction: Ratchet Action Cable Cutter Ratchet Action Cable Cutter Ratchet Action Cable Cutter Ratchet Action Cable Cutter Ratchet Action Cable Cutter
detailed information:
Ratchet Action Cable CutterRatchet Action Cable Cutter Ratchet Action Cable Cutter Ratchet Action Cable Cutter Ratchet Action Cable Cutter Ratchet Action Cable Cutter Hand Crimping Tool, Hand Crimping Tools, Ratchet Crimping Tool, Ratchet Crimping Tool, Ratchet Crimping Tools, Ratchet action tool, Terminal Crimping Tools, Coax Crimping Tools, Coaxial Crimping Tools, Crimping Pliers, Hydraulic Crimping Tool, Hydraulic Crimp Tool,
Wire Stripper, Cable Wire Stripper, Strippers & Crimpers, Wire Stripper Cutter, Wire Stripper for Coaxial Cable, Cable Cutter ,Crimping & Stripping Tool, Cable Tie Tool
About Crimp Tools and Cable Strippers
Crimp tools and cable strippers are used to prepare cable for installation. There are many different types of crimp tools and cable strippers. Examples include cable tie tools, strength-saving ratchet terminal crimping tools, hand crimp tools, and compression crimp tools. A cable tie tool is used for tightening ties around wire and cable bundles. A hand crimp tool is used in situations that present restrictions to crimp equipment size, weight, and maneuverability such as those presented with wire harness assembly boards. These crimping tools can be either manually-driven or power-driven. Crimp tools and cable strippers are commonly available.
Crimp tools and cable strippers function in a variety of ways. Crimp tools and cable strippers will properly crimp and strip solid or stranded wire, Teflon, PVC, nylon, rubber, neoprene, and most other jacket or insulating compositions. A cable tie tool controls loose wires that can be hazardous. A cable tie tool uses a tension control lever to provide precise tightening. Another lever cuts off the ties, so no additional tie ends will be visible. An Crimps Strips & Cuts Tool has a built in cable stripper as well as a wire cutter that cuts wire in one cycle. The Crimps Strips & Cuts Tool consists of a steel frame with black oxide coating. The precision ground crimp dies and the full-cycle ratcheting mechanism enable the tool to perform consistent terminations. A hand crimp tool consists of a ratchet mechanism hand tool and a set of jaws. The jaws comprise of upper and lower crimp dies. The contact is correctly crimped when the crimping tool is free to open at the fully closed position, e.g., when the ratchet releases. Hand crimp tools provide for a means of accurately locating, supporting, and holding a terminal or connector in place during crimping as opposed to the operator holding the components. A compression crimp tool utilizes a full cycle mechanism to assure consistent connector shut heights. Compression crimp tools achieve maximum mechanical advantage with reasonable hand pressure. Compression crimp tools feature connector shut heights that conform to industry standards and are precisely engineered for specific connector requirements. Crimp tools and cable strippers are designed and manufactured to meet most industry specifications. |
| Product Specifications | | HS-765 Ratchet Action Cable Cutter
Ratchet type cable cutter type HS-765,has been adopted ratchet driving unit in order to be operated by one hand only.
Only one hand could cut cables easily due to very light weight.The cutter is applicable for cutting cu/al cable,single strand or multi-strands of cables.
Attention: it could not be used to cut steel wires and copper hard drawn wires.
LK0960 Ratchet Action Cable Cutter
For copper and aluminium cables with girid rubber or plastic sheaths
Model 95 31 720: external diameter from 6-60mm
Model 95 31 870: external diameter from 6-100mm
Suitable for cables with steel sheath reinforcement
Cuts smoothly and cleanly without crushing
The shears can be opened to any cutting position
Can be used even in confined areas
Knife made of special steel
Not suitable for steel wire cables,steel wire
Cutting capability: 960mm2
Weight: 5.6kg
Length: 870
|
| Contact Information |  | | Contact Person: |  | | Phone: |  | | Fax: |  | | Business Address: | A501,Building 9 Anju Community,Liushi town Wenzhou city,Zhejiang province,wenzhou,China(CN) | | E-Mail: |  |
PLEASE NOTE:
AsianProducts have not verified this company and their product. Therefore we cannot guarantee they will respond to all buyer communications. |
|  | |  |
| | |
Promotion 
Related Products 
