V-10/100MMC Series Media Converter is designed to meet the needs for massive fiber network deployment and able to extend a legacy copper based Ethernet network via fiber cable to a maximum distance up to 120Km. It is fully compliant with IEEE802.3z s... - Update: 2009-04-23

With 4 E1 lines to transmit 2 Ethernets data, and the 2 Ethernet can work at the same time when they are in different LAN. For example, the IP of LAN1 is 192.10.10.1, the IP of LAN2 is 128.1.1.1 the two Ethernets 10/100Mbps can work at the same tim... - Update: 2009-02-03

DHODT-LMFIT is a modularized unit with 4 universal slots, supporting different interface cards, such as STM-1 fiber optic cards, E1 card, Ethernet cards(EoS VCAT), and V.35 card. The main board cross-connect capacity is 504?504 VC-12s (8?8 VC-4s), a... - Update: 2008-09-26

Features 1. 1U box SDH/MSPP with 1 or 2 STM-1 optical interfaces and 63E1 interface. 2. Optical interface supports ALS (Auto Laser Shutdown) function 3. Inter-working with popular SDH/MSPP products of various vendors 4. Su... - Update: 2008-09-26

High Switching Capacity and Wire-Speed Layer 2-4 Switching >>16 Gbps switching capacity; >>11.9Mpps forwarding; >>Hardware-based Layer 2-7 switching. Intelligent QoS >>32M shared packet buffer and advanced HOL blocking prevention mechanism; ... - Update: 2008-09-02

T optical fiber connector is divided into two types:single mode and multiple mode.End face contact types consist of PC�NUPC and APC.The patch cable contacting different connector or interface is called single mode patch cable.Veecom applies the advan... - Update: 2008-09-02

The device is a well-designed high-speed ADSL2+ Modem, which provides the 1 port switch function, supports kinds of network protocols and runs steadily, and is compatible with various DSLAMs. It can create a network in your home or office and allows ... - Update: 2008-08-22

��Optional data rate: Synchronism 600bps to 128Kbps ��Asynchronism 600bps to 38.4Kbps ��It has two kinds of interface at the same time: V.35 and RS232 only need switch to choose ��Compatible RAD ASM31, TAINET, DT128, LOOP-U3500 ��To setup all... - Update: 2008-08-22

*Realize E1 or V.35 signal transmitting over fiber;transmitting distance can reach 120Km without repeater *E1 interface:Framed & Unframed optional,75 & 120 ohm seletable *V.35 interface:support N��64K bit rate DTE & DCE optional *Three loop back m... - Update: 2008-08-22

*Interface conversion between E1 and V.35,E1 and Ethernet *Support ITU-T V.35,G.703,G.704,G.823 *Fully compatible with IEEE 802.3 and Ethernet Standards *Standalone and chassis module available,support hot-swap *Framed(N*64Kbps) and unframed(2.04... - Update: 2008-08-22