ShenZhen Wanscam Technology CO.Ltd

P2P IP CAMERA,MINI IP CAMERA,WIFI IP CAMERA,INDOOR IP CAMERA, Manufacturer and Supplier - China(CN)

Wanscam indoor mini support 32G TF Card Wifi wireless P2P IP camera

Wanscam indoor mini support 32G TF Card Wifi wireless P2P IP camera

Business Information

  • Min. Order : 1
  • Certificate : CE,FCC,,,,,,RoHS,
  • Made In : China(CN)
  • Packaging : 182mm x 110mm x 149mm (LxWxH)
  • Supply Capability : 40,000 sets
  • Delivery Time : 3 days
Favorites

Product Features

Model No: JW0005

1. CMOS, DC 5V2A.
2. 13 LED, IR distance 10M. Lens 3.6 mm
3. Two-way audio, Remote Pan/Tilt rotate, Indoor
4. Wi-Fi/802.11/b/g/n ,PC CMS to control multi-cameras.
5. Motion detection, email alert, FTP upload
6. Iphone, 3G phone, Smartphone supported
7. Multi-language, Firefox, Safari, Google browser
8. Pan:270°, Tilt: 90°, Speed:15-70°/S
9. Color: Black or White.
10.P2P, PNP: Plug&play, Support QR code scanning to view on Iphone and andriod Mobiles

Product Specifications









Wireless Network IP Camera
(For PC View)

Night Vision & Remote Operation



User Manual
(Applicable models: JW004,JW005,JW006,JW008,JW0011,JW0012)

















These are the models:





Packing List

Untie the pack and check the items contained against the following list:

●IP Camera X1
●Warranty Card X1
●DC Power Supply X1
●CD X1
●Certificate of Quality X1
●Mounting bracket X1

NOTE: Please contact us immediately if anything damaged or short of contents.




CONTENTS

1. Product Introduction ...........................................................................................3
1.1. Safety Introduction .........................................................................................3
1.2. Product Specifications................................................................................. ....3
1.3. System Requirements........................................................................................3
1.4. Product Views……………..............................................………….................4
1.4.1 Front View................ ......................................................................................4
1.4.2 Interface View.................................................................................................5
1.5. Hardware Installation........................................................................................5
1.6. Software Installation..................................... ....................................................6
2. Software Operation...............................................................................................6
2.1. Search Tool Software................................................. ......................................6
2.1.1. Search The IP address of the Camera.............................................................6
2.1.2. Configuration of the Network............................ ............................................7
3. Real-Time Video Demonstration................................... ......................................9
3.1. Camera Login.............................................................. .................. ...................9
3.2. View via IE Browser.........................................................................................10
3.3. View via Safari, Firefox, Google Browser. .................. ...................................13
3.4. Main Menu interface Introduction....... ............................................................14
3.5. Administer Setting Instruction......................... ................................................15
3.5.1. Multi-Device Settings....................................................................................16
3.5.2. Basic Network Settings.............. ...................................................................17
3.5.3. Wireless Settings.......................................................... .................................17
3.5.4. Dynamic DNS Settings...................................................................................18
3.5.4.1. DDNS Setting .............................................................................................18
3.5.4.2. Port Forwarding Settings......... ...................................................................20
3.5.4.3. DDNS Register........ .................. ................................................................23
3.5.5. Email and FTP Service Settings....................... .............................................28
3.5.6. Alarm Service Settings............................. .....................................................29
3.5.7. Reset/Firmware Upgrade Settings............... ..................................................29
3.5.8. Record&Capture Path.......................... ..........................................................29
3.5.9. Reset/Firm Ware Upgrade...............................................................................30
3.5.9.1.Restore Factory Settings................................................................................30
3.5.9.2. Reboot Equipment........................................................................................30
4. Warranty................................................................................................................31












1. Product Introduction

1.1 Safety Instructions

(1). Use the proper power source.
Do not use this product with a power source that supplies more than the specified Voltage (100-240V AC).

(2). Never insert anything metallic into the camera.
Inserting metal object into the camera can be a source of dangerous electric shock.

(3). Do not operate in wet or dusty environment.
Avoid places like a damp basement or dusty hallway.

(4). Do not attempt to disassemble the camera.
You may be subjected to severe electrical shock if you attempt to take apart the camera while the camera is connected to its power source. If there are any unusual sounds or smells coming form the camera, unplug it immediately and contact Customer Service.

(5). Handle the camera carefully
Dropping the camera on any hard surface may cause a malfunction. If the camera does not work properly due to physical damage, please contact Customer Service for repair or exchange.

(6). Apply to FCC and CE Rule
This device complies with part 15 of the FCC and CE Rules. Operation is subject to the following two conditions:
1: This device may not cause harmful interference.
2: This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC and CE radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.


1.2. Product Specifications

*- Adopt high Performance, strong function media processor 32Bit RSIC
*- High sensor CMOS
*-Adopt optimized MJPEG video compression algorithm, realize high-definition images
transmission in narrow bandwidth;
*-Maximum support 4 users viewing at the same time, no limit for users if using forwarder
Server function;
*- Built in Web Server, convenient for users to use standard browse to realize the
real time monitoring and setting administration;
*-Support WIFI:802.11 b/g/n wireless networking;
*-Support remote system update;
*-Support DDNS analysis, support LAN & Internet (ADSL,Cable Modem)
*-Support variety of network protocol: TCP/IP, UDP, SMTP, PPPoE, Dynamic DNS,
DNS Client, SNTP, BOOTP, DHCP, FTP, SNMP, WIFI/802. 11b/g
*-Parts of modes products support one/ two way audio, talkback;
*-Support motion detection alarm function (area & sensitivity Configurable);
*-Support image snapshot
*-Abnormal automatic recovery function, auto reconnection available when network Interruption occurred.
*-Dynamic alarm function, alarm time-schedule configurable.

1.3. System Requirements














1.4. Product Views


1.4.1 Front View 1.4.2 Interface View


Figure 1.1 Figure 1.2


1: Audio Out , 2: Audio In
3: Ethernet interface: RJ-45 interface. Power Supply Light: constant on after power up
Network light: constant sparkle after power up data transmission.
4: Antenna:
5: Power input interface: connect direct current 5V Power
6: TF Socket : Useless for JW0004.


1.5 Hardware Installation

Follow the steps below to set up your camera hardware. Make sure to follow each step carefully to ensure that the camera operates properly
1. Install the Wi-Fi antenna (For wireless model) .
2. Plug the power adaptor into camera
3. Plug the network cable into camera, the other side to the router/switch
4. It takes approx 30 seconds to boot up the camera, then you will find the IP address from
“Search Tool” (Figure: 1.8)
5. When the power on and network cable connected, the green led of the real panel will keep on, The yellow led will keep flash.



Figure 1.3


1.6 Software Installation



Figure 1.4

Open the CD Install the follow software:

1. ActiveX: Click “OCX setup”—“Next”—“Install”—“Finish”.
2. Search Tool: Open the CD, click ,The Search Tool will run automatically.( No need to install. You can copy this software to your desktop.)

Figure 1.5



2. Software operation

2.1 Search Tool Software

2.1.1 Search the IP address of the camera.

When the device has been mounted properly, you can double click the Icon “ ” run this IP address search tool.

Figure 2.1

Note: The software searches IP Servers automatically over LAN.
There are 2 cases:
1. No IP Cameras found within LAN. After about 1 minute search, the Equipments List Field not show the IP address.
2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the total number is displayed in the Equipments list field as shown in Figure 2.1

Note:
1. Current Computer indicates the Computer’s IP Address information.
2. Equipment information indicates the IP camera’s IP Address information.
3. If you find that the camera’s “Subnet Mask”, “Gateway”, “DNS Server” is not as some as your current computer’s. You need try to change the camra’s IP address.
Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router’s or your current computer’s.
4. If you don’t know how to configure your camera’s IP address. You can click “ Update” button. The Search Tool software can help you configure a usable IP camera automatically.


2.1.2 Configuration of the Network
Once your camera’s IP address’ Subnet Mask, Gateway, DNS Server is the same as your PC or router, you need configure the camera’s Network parameter manually.
IP address: Fill in the IP address assigned and make sure it is in the same subnet as the Gateway, and the subnet should be the same as your computer or router. (i.e. the first three sections are the same)
Subnet Mask: The default subnet mask of the equipment is: 255.255.255.0. You can find the subnet mask from your PC or router.
Gateway: Make sure it is in the same subnet with PC’s IP address .Here gateway is the LAN IP of your router.
Primary DNS: IP address of IPS network provider. You can also set it as the same as the Gateway.
NOTE: You can find out the Subnet Mask, Gateway, Primary DNS of your PC from the “Search Tool” software.
Http Port: LAN port assigned for the equipment, default is 99. You can change the port number to any one you want such as : 98,211,9999 etc.



3: Real-time Video Demonstration.

3.1. Camera Login:

You can access the camera through IP Camera Tool or IE, Firefox, Safari, Google Chrome or other standard browser directly.
1. Double click the IP address of the IP Camera listed (Figure 2.1). The default browser you use will run automatically and come to the camera login interface. (Figure 3.1)
2. To access the camera by IE Browser directly, just type the camera’s IP address, for example, if the camera’s IP address is 192.168.1.99:99:



Figure 3.1
Username: admin
Password: NO PASSWORD.

Input the correct user name and password, the Sign In interface will pop-up.
There are three models to login (figure 3.2).

Figure 3.2

(1) ActiveX Mode (For IE Browser): available in IE6.0 or above explorer
(2) “RTSP Stream Mode”: available in Firefox, Safari, and Google browser.
(3) “No Plug-In Mode”: available in smart phone browser.
(4) SD card video playback online


3.2. View via IE Browser.


Choose Active Mode (For IE Browser), and sign in.
The first time login the camera, maybe get ActiveX prompt as the picture below, please download the Ocx(or run in CD) and install first then choose Run Add-on, refresh and login the camera again, then will see live video, details as below:



Figure 3.3
After Download Ocx-Setup (oPlayer Software), Click and install it, untill finished.

Figure 3.4


Figure 3.3 Windows XP system

Figure 3.4 Win7 System

Note: If there is still no live video after run ActiveX, please try to enable the ActiveX options of IE security settings, please do the follow steps:
1. Close the firewall of your computer.
2. Change the ActiveX settings, “IE” browser > “Tool” > “Internet Options” > “Security”>
“Custom Level” > “ActiveX control and Plug-ins”, all the ActiveX options set to be
“Enable”: Especially:
Enable: Download unsigned ActiveX controls
Enable: Initialize and script ActiveX controls not marked as safe
Enable: Run ActiveX controls and plu-ins


Figure 3.5


Figure 3.6
In Addition: you can also click “start” menu->“Internet Explorer”, choose “Internet attributes “ to enter, or via “Control Panel” ->“Internet Explorer”, enter to Security setting.
3. If there is still no image, please close your anti-virus software, and then try step 1 & 2 again.
4. If you allowed the Active X running, But still could not see live video, Only a Red Cross in the center of the video, And the device status light change to yellow color , not green please change another port number to try, Don’t use port 80, usd other port such as99, 199 etc.

Figure 3.7
NOTE: Make sure that the firewall or anti-virus software doesn’t block the software or ActiveX. If you couldn’t see live video, please close your firewall or anti-virus software, and try again.

3.3. View via Safari, Firefox, Google Browser

Choose Server Push Mode (For Safari, Firefox, Google Browser), and sign in
Server Push Mode doesn’t support ActiveX, so some functions are not available, such
As Record, Audio, Talk, Speaker,The speed control bar, Zoom etc.),if you want to use
these functions, please use IE Browser.
The Control Interface in this mode is as bellow:



3.4. Main Menu interface introduction

Take the “Active Mode(For IE Browser)” For example:


Figure 3.8
The Pan/Tilt Feature only works when the cameras have this Pan/Tilt function.

This option enables log detection. After the online user clicks this button, a log is
entered into the camera’s Log Data documenting the IP address of users who have accessed the IP camera. This Option enables alarm detections too.

This button make the camera Vertical cruise (for the Pan/Tilt Cams).
This button make the camera Level cruise (for the Pan/Tilt Cams).
This button flips the image vertically.
This button flips the image horizontally.
This button for turn on and turn off the IR LED Light.
Control the speed of the Pan/tilt. Only work for the Pan/tilt Cams.
This button for setting the Preset of the camera. Only work for Pan/tilt Cams
This setting will show the date and time.
This setting changes the image resolution.
This setting changes the image frequency.
This setting changes the image brightness.
This setting changes the image contrast.
This option resets all main menu options to factory default.
This option opens the camera’s recording functionality menu.
This option takes a snapshot of the current screen and saves the snapshot to the PC’s Hard Drive.
This option enables User-to Camera audio. If the online user
This option enables Camera-to-User audio. If the online user has speakers connected and configured to their PC, clicking this option will allow them to hear audio from the location of the camera.
This button opens the IP camera’s Backend Menu
These options enable single view, quad screen view, or 9 screen view: This function serves no purpose unless you have more than one camera connected and configured to your interface.
* Please refer to section 8.1.1 Multi-Device Settings*

3.5. Administer Setting Instruction

When login as Administrator, you can enter the IP Camera for Administrator.
Administrator supports all the settings and operations of the camera; you can set and control it freely There are some special functions only for administrator as below:

Alias setting : You can set your favorite device aliases.
Date&Time set : seting the date and time.
User settings : Can be set up to 8 users. On this page you can set up accounts of the user name, password, as well as in their packet (administrator, operator, visitor).

Send messages to the supplier!

Please leave your comments here!

No data.

Other Related Products

Rank This Company

Please leave your comments here!