Wuxi Ark Fluid Science Technology Co.,Ltd.

cooling tower,water chillers,cooling systems,open cooling tower,cooling towers, Manufacturer and Supplier - China(CN)

Open Cross Flow Cooling Towers

Open Cross Flow Cooling Towers

Business Information

  • Made In : unknown
Favorites
  • Open Cross Flow Cooling Towers

Product Features

1. Cooling tower design working condition of the cooling tower: water inlet temperature t1=37℃; water outlet temperature t2=32℃;wet bulb temperature t=28℃;dry bulb temperature 31.5℃;atmospheric pressure=9.94X104pa.

2. The cooling towers standards for open cooling tower (natural draught cooling towers )of Wuxi Ark company is designed according to the national working condition. We can also provide special design for non-standard working condition to customers.

3. Due to site limitation or modeling requirement, the company especially design and custom to make the cross flow cooling tower according required dimensions.

4. Base bearing surfaces are in a same horizontal plane and its elevation and each dimension error is less than 5mm.

5. Base height of the cooling tower h2 should be determined according to the pipe diameter of the water outlet pipe and installation height.

6. The principle of evaporative cooling of open cooling tower is direct free cooling .

7. Compare to the most efficient cooling system from marley cooling towers, although different as marley cooling tower specs, but our cooling tower services and cooling tower accessories

Product structure

The high-quality raw material PVC sheet in use is processed by hot press molding or vacuum molding; the tower is designed in the whole suspension and can resist corrosion and biological erosion; the unique 3D folded hole design is featured with extremely high water collection efficiency and extremely low air resistance and can control drift loss below 0.0005% of circulating water so as to save water energy in maximum and prevent the transmission of legionnaires disease bacteria

Structure detail

The characteristics of opened cooling tower -FK

New technologyThe whole cooling fin based on advanced technology optimizes design structure and makes reasonable volume

New materialThe improved fireproof PVC raw material is used as the material of cooling fin and FRP is made of the latest improved material in USA

New processThe primary molding of adsorption plastic mould is adopted. The split jointing is used for structure, rapid and firm

New product Cooling performance is 105%, drift rate is not more than 0.001% and the new product is characterized by novel appearance, reasonable structure and equitable price. The combined tower can be assembled according to site conditions.

Belt (rubber) cast ironFRPBelt cover (FRP) Electric motor (fully-enclosed) FRPAir duct (FRP) Fan shellaluminium alloy : Air blower for wing unit (Hot dip galvanized steel) Ladder (hot-dip galvanized steel) PVCInner connecting pipePVC FRPWater spray basin coverFRPFRPSide plateFRPFRPAccess doorFRPAisleHot dip galvanized steelPPWater distribution sprayerPPPVCSpray packing (flame retardant PVC)
Flange for outlet water (hot-dip galvanized steel) FRPSump basinFRP

 

 

 

Product Specifications

(1). Cooling system
Packing (Famous Taiwan enterpriseFormosa Plastic Group) The high-quality raw material PVC sheet in use is processed by hot press molding or vacuum molding; the tower is designed in the whole suspension and can resist corrosion and biological erosion; the unique 3D folded hole design is featured with extremely high water collection efficiency and extremely low air resistance and can control drift loss below 0.0005% of circulating water so as to save water energy in maximum and prevent the transmission of legionnaires disease bacteria.

(2). Bulk water system
The square tower is set with unique overflow device and shower nozzle so as to make cooling water distributed stably and evenly and meet the requirements of energy saving of the system under different loads (The cooking water flow will vary).

(3). Motor for pneumatic system: The motor only for the fully closed air cooling tower is of IP55 and insulation level of Level F, and suitable for 380V/3/50Hz power supply.
Fan blade: The fan blade is made of aluminum alloy and characterized by light weight, high strength, high air flow, low speed in operation, low energy consumption, low noise and long service life. The angle can be adjusted arbitrarily according to the operation load and the rated power is utilized in maximum so as to make the fan in the best operation status.

(4). Transmission deceleration system

The standard product is set with the belt reducer, the import waterproof anti-skid belt and import high-precision bearing are adopted, and there is long service life and low noise in operation.

(5). Mechanical structure Shell (America famous enterpriseAshland)

The imported weather-resistant gel coating which resists corrosion and contains uvioresistant stabilizer and is characterized by color uniformity, color fading resistance, anti-aging and surface as smooth as mirror is used. The round tower is designed like a bottle and the square tower is designed with the stripe surface and in round corner so that the surface is free from reflection of light to prevent light pollution.

Send messages to the supplier!

Please leave your comments here!

No data.

Other Related Products

Rank This Company

Please leave your comments here!