Stereomounting Tapes, foil adhesive, 43010, 43620, graphic tapes, Manufacturer and Supplier - United Kingdom
Web Splicing Polyurethene (PU) and PVC Synthetic Leather (80-55)
SPLICING TAPES FOR RELEASE PAPERS
(splicing tape as recommended by Arjowiggins )
www. printernational. co. uk
A unique range of single sided self-adhesive tapes for splicing surface treated release/casting papers as used in the manufacture of SYNTHETIC LEATHER. The system consists of:
For PU and PVC Casting Papers use:
The tapes available for the top splice have a special release coat on the tape surface which ensures easy removal of the synthetic leather from the splice.
A choice of 3 paper based tapes with very specific properties and easy to apply. Recommended for both PU and PVC release papers.
TOP SPLICE TAPES
For PU and PVC Casting Papers use
88-06 HT Polyester Silicone Splicing Tape - Black. Regarded as the best top slice available.
(see our data sheet)
For PVC Casting Papers only use:
88-01 HT Polyester Acrylic Splicing Tape - Clear . (see our data sheet)
BACK SPLICE TAPES
80-50 Adhesive Paper Tape - Green
0.10mm thick. This tape is flexible and conformable with a high level of adhesion, shear and temperature resisitance (200 deg C short term) .Ideal for PU production. (see our data sheet)
80-60 High Performance Kraft Paper Tape - Brown
0.16mm thick. This tape offers the highest level of adhesion, shear properties and temperature resistance (240 deg C for 3 minutes). Especially recommended for PVC castings, heavily embossed papers and the newer type of smooth casting papers with surface coatings on the back. (see our data sheet)
80-55 Economy Kraft Paper Tape - Brown
0.17 mm thick. It has the advantage of much lower cost with excellent 'quick-stick' properties.
(see our data sheet)
General Properties and Application
1). The tape surface of 88-06 and 88-01 has been specially treated to ensure seperation of the synthetic leather from the splice in the same way as it separates from the release paper. This ensures continuous production of synthetic leather.
2). All tapes are easy to apply. Application with our free Plastic Applicator is recommended for a secure bond, including heavily embossed papers. Under cold conditions a warm iron can be moved over the splice to enhance adhesion. For the Back Splice abrasion of the release paper prior to applying the Back Splice will improve adhesion further.
3). The Splicing Tapes will withstand the temperature conditions encountered in the production of synthetic leather and will last through six or seven production cycles. The Casting Paper stands 10-12 passes.
4). The Splicing Tapes can be stored up to 12 months prior to use, but they must be stored in dry conditions at around 25 deg C inside the original packaging. Protection from water/humidity, extreme temperatures and direct sunligh is necessary. .
5). Our Customer Care Service is outstanding. Dispatch can be arranged worldwide by airfreight immediately after receipt of order.